BURNDY Mechanical Connectors

Aluminium / copper / bronze / steel connectors used to connect a wire or a cable to a terminal in an electrical circuit. Feature slotted / hex heads for easy installation and are available in different minimum & maximum conductor sizes

Burndy mechanical lugs are used for connecting or terminating large cables & wires. These universal terminals are made of high strength extruded aluminium alloy and are electro-tin plated to offer resistance against extreme temperatures & corrosion. They come integrated with slotted screws for easy repair and maintenance. Choose from a wide range of these UL-listed lug connectors, available in 300, 600 and 750 kcmil conductor sizes. Raptor Supplies also offers Burndy split bolt connectors featuring a copper pressure bar and square head.

Burndy GAR Series mechanical grounding connectors are used for attaching cables perpendicular or parallel to pipes, tubes or rods. They feature copper alloy construction to provide radio frequency shielding and corrosion resistance. These UL listed connectors can be installed using one wrench and include U-bolts, lockwashers & nuts, allowing the entire connection to be buried under concrete surfaces. They are integrated with cable clamp swivels for grounding one pipe or several pipes at 90 degrees, and are available in lengths ranging from 2 to 8 inches.
Raptor Supplies also offers Burndy grounding & bonding connectors including mechanical and compression accessories.

Burndy three lug connectors are suitable for connecting or terminating cables / wires for use in aluminium and copper conductors. These universal terminal connectors are made of electro tin-plated aluminium alloy to offer low contact resistance and excellent thermal protection. Choose from a wide range of these UL-listed units in 5/16, 3/8 and 1/2 inch stud sizes. Raptor Supplies also offers Burndy terminal mechanical lugs in copper and tin-plated aluminium variants.

Burndy GAR Series ground connectors are designed for joining a variety of cables to a rod or tube in parallel or at right angle direction. These UL-listed connectors feature a copper alloy cast body and Durium Silicon bronze hardware including U-bolts, nuts and lock washers, to allow easy installation of connectors to the ground or concrete without the risk of corrosion. They are designed to accommodate copper conductor (rod) sizes ranging from 8 to 3 AWG (solid) and 9 to 4 AWG (stranded), respectively.

BURNDY Crimpit Series H-Taps are copper compression connectors designed for making secure electrical connections. They are tin-plated and can accommodate a wide range of wire sizes. For the main wires, they can handle sizes ranging from 2 AWG to 250 kcmil, including different classes such as B, C and I, as well as DLO (Diesel Locomotive Cable). For the tap wires, they can accommodate sizes from 14 AWG to 8 AWG, with various class options such as B, C, G, H, I and DLO, as well as class K for Tap 1. These connectors feature independent tap grooves for flexible design and installation. They ae colour-coded to match the corresponding installation die and have embossed die index markings for inspection purposes. These connectors come with a third-hand tool for assistance during installation.

BURNDY Durium Series ground clamps are used in electrical grounding applications to enhance safety by diverting electrical currents from sensitive equipment and personnel. They are used in telecommunications, construction and utility sectors to establish reliable connections between grounding conductors and structures like pipes, rods or fences. These ground clamps allow 3-gang / 8 inch hex / bolt / stud size configuration for secure and easy installation. They are designed to accommodate main / primary conductors with sizes ranging from 8 to 4 AWG. These ground clamps have the capacity to accept 1 or 2 ground conductors, reducing the need for additional connectors during installation. They offer an impressive low-impedance maintain stable connections, minimising signal interference and enhancing the overall effectiveness of the grounding system.

Burndy inline multitap connectors are designed for quick wire connections and terminations. They feature plastisol convered aluminium bodies for insulation, chemical resistance & preventing current leakage. These connectors have double-sided entries and an inline design for combining wires of multiple sizes. They are equipped with aluminium screws to eliminate the need for ferrules. Choose from a wide range of inline multitap connectors, available in hex and slotted head configurations.
Raptor Supplies also offers Burndy insulated gutter taps for connecting wires.

Burndy water pipe grounding clamps / water pipe clamps provide mechanical grounding connection for bars, straps, cables, rods or tubes. They feature aluminium / copper alloy / solid cast bronze construction for high ductility, UV resistance and excellent electrical & thermal conductivity. These clamps are integrated with Durium U-bolts, nuts and lock washers and are suitable with braids for ground rods & switch handles, and are available in lengths ranging from 2.25 to 8.5 inches.
Raptor Supplies also offers cable tray ground clamps with a ribbed neck to prevent rotation during installation.

Burndy multitap connectors are L-shaped connectors designed for quick wire connections and terminations. They are made from aluminium covered in PVC insulation for resistance to chemicals & preventing current leakage. These connectors feature single or double sided entries for combining wires of multiple sizes, and tin-plated steel / aluminium screws to eliminate the need for ferrules. Choose from a wide range of multitap connectors, available in 2, 3 and 4 port configurations.
Raptor Supplies also offers Burndy insulated gutter taps for connecting wires.