Item | Washdown Brake |
Bolt Circle Dia. | 5 7/8" |
Brake Mouting Position | Horizontal |
Continuous Duty | Yes |
Enclosure Type | Totally Enclosed |
Finish | Epoxy Paint |
For Environment | Food Production, Washdown |
For Use With | Single Phase Motors, When Wired Per Instructions |
Frequency | 50/60 Hz |
Keyway Depth | 3/32" |
Keyway Width | 3/16" |
Lead Length | 15" |
Lever Release | Manual |
Lever Type | Manual |
Max. Ambient Temp. | 40°C |
Max. Hp @ 1725 Rpm | 2 hp |
Max. Hp @ 3450 Rpm | 3 hp |
Mounting Orientation | Horizontal |
Nema/iec Frame | 56C/140TC |
Outside Dia. | 6 22/25" |
Overall Length | 6.94" |
Service Factor | 1 |
Shaft Dia. | 5/8" |
Shaft Length | 2" |
Type | C- Face Magnetic Disc |
Voltage @ 60 Hz | 115/208-230V |
Application | Door Openers, For Rapid Stopping And Holding Power Conveyors, General Machine Drives |
Bolt Circle Diameter | 5.875" |
Clutch/brake Type | C Face Magnetic Disc |
Coil Voltage | 110/208-220V AC @ 50 Hz, 115/208-230V AC @ 60 Hz |
Converts | NEMA C-face motors And gearmotors to brake motors or brake gearmotors |
Horsepower @ Rpm | 2 hp @ 1725 RPM, 3 hp @ 3450 RPM |
Housing Material Finish | White Epoxy Paint |
Maximum Ambient Temperature | 40°C |
Maximum Speed | 3450 RPM |
Motor Frame Designation | 140TC NEMA |
Mounting Location | Between Motor And Reducer, NEMA C Face Motor |
Outside Diameter | 6.88" |
Phase | Single |
Shaft Diameter | 5/8" |
Standards | BISSC CERTIFIED, COMPLIES WITH 3A DAIRY STANDARDS, COMPLIES WITH NEMA DEFINITION MG1-1.26.5, CSA CERTIFIED, USDA APPROVED |
Static Torque | 6 lbs.-ft. |