info@raptorsupplies.com

FLUORAMICS Fluoramics PTFE Tapes


Fluoramics LOX-8 full density PTFE tapes are multi-purpose & oxygen-approved PTFE tapes that are ideal for sealing threaded joint fittings in applications including cryogenic assemblies & high pressure applications. They can be used with Fluoramics pipe sealants for greater hold in large pipes or critical connections....Read more

Filter
FLUORAMICS 9010005A
FLUORAMICS 9010010B
StyleModelPrice
A
9010005		€9.20
RFQ
B
9010010		€21.46
RFQ

Working Mechanism

  • Clean dirt or oil from the male & female threads of fittings. Clean off any material on the threads by using a brass or stainless-steel wire brush. Wipe the threads using acetone & a lint-free cloth.
  • Apply two wraps of these full-density PTFE tapes in the thread rotation direction by starting two threads back from the male fitting end while maintaining tension during wrapping.
  • Apply the thread sealant paste (LOX-8 Paste) liberally over the tape using a finger during large or critical connections.
  • Fit & tighten the male & female pieces together. Wipe off any excess sealant.

Features

  • Fluoramics LOX-8 full density PTFE tapes have anti-galling & anti-seizing properties for protecting the applied surface.
  • These oxygen-tested thread tapes are waterproof for handling wet applications.
  • They are compatible with pipes made of metal or cured epoxies carrying fluids, including aggressive chemicals.
  • Fluoramics 9010005 having a width of 1/2 inches is suitable for threads up to 1-1/2 inch in diameter. Fluoramics 9010010 having a width of 3/4 inches is suitable for large diameter pipe threads.

Compatible Accessories

  • Flouramics Pipe Sealants: Pipe sealants like LOX-8 thread sealant pastes are used with these Fluoramics LOX-8 full-density PTFE tapes for greater holding power in critical connections.

Standards and Approvals

  • MIL-T-27730A
  • A-A 58092
  • ASTM G72
  • FDA approved for food use (21 CFR 177.1550)

Frequently Asked Questions

What is the temperature rating of these Fluoramics LOX-8 full density PTFE tapes?

These Fluoramics LOX-8 full density PTFE tapes can operate at temperatures ranging from -400 to 550 degrees F (-240 to 287 degrees C).

What are these Fluoramics LOX-8 full density PTFE tapes made of?

These thread tapes have EU Regulatory compliant PTFE construction without VOCs or silicone particles for non-toxic & non-hazardous properties.

What is the pressure rating of these Fluoramics LOX-8 full density PTFE tapes?

These Fluoramics LOX-8 full density PTFE tapes have a pressure rating of 10000 psi during general use and 5004 psi during steady-state oxygen service.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More