DAYTON 5L Series DC Gearmotors, TENV, Die Cast Zinc
Filter
Bearings: Roller on Case, Ball on Motor , Brushes: Replaceable Externally , Enclosure: TENV , Finish: Matt Black , Gear Case: Die Cast Zinc , Gear Type: Powdered Metal Bevel And Steel Spur , Housing Material: Die Cast Zinc And Steel , Input HP: 1/8 , Insulation Class: F , Keyway Size: 3/16" Sq , Length Less Shaft: 11.75" , Lubrication: Gear Oil , Max. Ambient Temp.: 40 Degrees C , Motor Type: Permanent Magnet , Mounting: All Position , Overhung Load: 175 lb. , Reversible Shaft Output: No , Rotation: Reversible , Seals: Lip , Shaft: Single , Shaft Orientation: Right Angle , Thermal Protection: None
Style | Model | Full Load Amps | Gear Ratio | Max. Torque | Nameplate RPM | RPM Range | Voltage | Price | |
---|---|---|---|---|---|---|---|---|---|
A | 5LAE8 | 1.41 | 82:1 | 280.0 in.-lb. | 22 | 16 to 30 | 90 VDC | €815.63 | |
A | 5LAE9 | 1.72 | 60:1 | 266.0 in.-lb. | 30 | 16 to 30 | 90 VDC | €851.41 | |
A | 5LAF1 | 1.72 | 28:1 | 123.0 in.-lb. | 64 | 51 to 75 | 90 VDC | €843.99 | |
A | 5LAF0 | 1.72 | 44:1 | 196.0 in.-lb. | 40 | 31 to 50 | 90 VDC | €838.32 | |
A | 5LAF2 | 1.73 | 23:1 | 103.0 in.-lb. | 77 | 76 to 100 | 90 VDC | €844.54 | |
A | 5LAF3 | 2.01 | 10:1 | 47.0 in.-lb. | 177 | 151 to 200 | 90 VDC | €765.19 | |
A | 5LAG0 | 5.2 | 82:1 | 280.0 in.-lb. | 20 | 16 to 30 | 24 VDC | €752.73 | |
A | 5LAG1 | 6.3 | 60:1 | 266.0 in.-lb. | 26 | 16 to 30 | 24 VDC | €737.68 | |
A | 5LAG2 | 6.3 | 44:1 | 196.0 in.-lb. | 36 | 31 to 50 | 24 VDC | €806.93 | |
A | 5LAG3 | 8 | 28:1 | 165.0 in.-lb. | 54 | 51 to 75 | 24 VDC | €782.38 | |
A | 5LAG4 | 8 | 23:1 | 137.0 in.-lb. | 65 | 51 to 75 | 24 VDC | €815.17 | |
A | 5LAG5 | 8 | 10:1 | 63.0 in.-lb. | 150 | 100 to 150 | 24 VDC | €749.87 | |
A | 5LAF4 | 10.4 | 82:1 | 280.0 in.-lb. | 20 | 16 to 30 | 12 VDC | €844.03 | |
A | 5LAF7 | 16 | 28:1 | 165.0 in.-lb. | 54 | 51 to 75 | 12 VDC | €833.31 | |
A | 5LAF9 | 16 | 10:1 | 63.0 in.-lb. | 150 | 100 to 150 | 12 VDC | €761.30 |
5L Series DC Gearmotors, TENV, Die Cast Zinc
Dayton 5L Series DC gearmotors provide high starting torque and precise variable-speed control for controlling wheelchairs, hospital beds, table lifts, power seats & more. They are powered by a DC power source for running TENV motor which in turns rotate the shaft with a maximum torque of 280 in-lb. The shaft can rotate in both clockwise and counterclockwise directions. These motors feature gear oil lubrication and ball bearings for smooth operation. The Class F insulation ensures operation even at high temperatures. Choose from a wide range of DC gearmotors, available in 12, 24 and 90VDC voltage ratings on Raptor Supplies.
We are here to help!
Looking for a part not listed here?
Explore More
- Drop-In Sinks
- Rechargeable Flashlights
- Refrigerated Compressed Air Dryers
- Floor Box Cover Accessories
- HVAC Control Ball Valves
- Chain and Chain Accessories
- Washers
- Wire Rope and Fittings
- Rags and Wipes
- Flooring
- JAMCO Bin and Shelf Cabinet
- SCOTCH Splicing Tape, Rubber
- DYNALON Funnel Anit-splash
- EATON C Series Complete Molded Case Circuit Breakers
- BANJO FITTINGS Tank Nut
- LOVEJOY AL Type Hubs With Keyway, Inch Bores
- HOFFMAN Proline Flotek Series FD Server Cabinets
- AMERICAN TORCH TIP Collets
- DAYTON O-Ring Seals
- WESTWARD Pins