RULAND MANUFACTURING Shaft Collars

Suitable for use as mechanical stops and bearing faces, as well as for locating components in motors without marring the shaft surfaces. Offered in quick clamp, set screw, one-piece clamp, threaded and two-piece clamp configurations

Ruland Manufacturing TCL Series shaft collars are designed to hold bearings & sprockets on shafts, situate components in motor & gearbox assemblies, and serve as mechanical stops. They are also ideal for power transmission applications in motors and gearboxes. These one-piece, clamp-style collars are easy to install & remove, and are held in place via set screws while distributing the clamping force evenly. They are REACH and RoHS 2 compliant for safe operation and operate at temperatures ranging from -40 to 350 degrees F. Choose from a wide range of set screw shaft collars, available in 303 stainless steel and 1215 lead-free steel variants on Raptor Supplies.

Two-piece, double wide shaft collars from Ruland Manufacturing are used for guiding, spacing, stopping, mounting & component alignment. They come in a clamp design that does not mar the shaft and allows easy removal & indefinite adjustments. These units are integrated with mated halves to offer a proper fit and alignment. These units are constructed using 1215 lead-free steel / 303 stainless steel to offer increased holding power and corrosion resistance. They are RoHS 3 & REACH compliant, and feature forged screws that are tested beyond DIN 912 12.9 standards to ensure maximum holding power. All units are stamped with bore size for easy identification.

Ruland Manufacturing MSP Series shaft collars are designed for spacing, guiding, stopping and component alignment in light duty applications. These collars are tested beyond DIN 912 12.9 standards to provide maximum holding power and come coated with bright / black oxide finish for glossy appearance. They are capable of withstanding temperatures ranging from -40 to 350 degrees F. Choose from a wide range of these collars, available in alloy steel & stainless steel screw options on Raptor Supplies.

Ruland Manufacturing threaded, one-piece shaft collars feature higher axial holding power than round bore shaft collars of similar sizes. They are ideal for guiding, spacing, stopping, mounting & component alignment. These units feature double-tapped threads to ensure precise and burr-free finish, allowing easy installation & removal, and a proper fit. They come with forged screws that test beyond DIN 912 12.9 standards to ensure maximum holding power. All units are stamped with bore size for ease of identification. These units are available in clearance diameters ranging from 20 to 59.2 mm.

Ruland Manufacturing offers MWCL Series double wide shaft collars having a clamp style design that does not mar the shaft and allows easy removal & indefinite adjustments. These shaft collars are manufactured from high grade 2024 aluminium / 303 stainless steel / 1215 lead-free steel for increased screw seating torque. They have a precisely controlled face to bore perpendicularity, with tight tolerances on bearing locknuts to offer positive alignment when a shaft collar is used as a load-bearing face / mechanical stop, or for mounting components. These RoHS 3 & REACH compliant units come with forged screws that test beyond DIN 912 12.9 standards to offer maximum holding power. These units are stamped with bore sizes for easy identification.

Ruland Manufacturing two-piece, double-wide shaft collars come in a clamp design that is easy to remove & indefinitely adjustable, and will not mar the shaft in the process. They are used as short rigid couplings for applications where a traditional rigid coupling is too long. These RoHS 3 & REACH compliant units feature 303 stainless steel / 1215 lead-free steel construction for increased holding power. They are equipped with forged screws that test beyond DIN 912 12.9 standards to offer maximum holding power. All units are stamped with bore sizes for easy identification. These units are available in bore diameters ranging from 6 to 25 mm.

Ruland Manufacturing offers two-piece shaft collars for guiding, spacing, stopping, mounting & component alignment. These units feature a clamp design that does not mar the shaft and allows easy removal & indefinite adjustments. They have a keyway to prevent slippage on the shaft when the shaft collar is used for positive drive. The forged screws test beyond ANSI standards, offering maximum holding power. They are RoHS 3 & REACH compliant and come with mated halves to offer a proper fit & alignment. These units feature 2024 aluminium / 303 stainless steel / 1215 lead-free steel construction to offer added holding power.

Ruland Manufacturing SP Series shaft collars are designed to hold bearings & sprockets on shafts, situate components in motor & gearbox assemblies, and serve as mechanical stops. They are also ideal for power transmission applications in motors and gearboxes. These 2-piece, clamp-style collars are easy to install & remove, and are held in place via 2 set screws while distributing the clamping force evenly. They are REACH & RoHS 2 compliant for safe operation and operate at temperatures ranging from -40 to 350 degrees F. Choose from a wide range of set screw shaft collars, available in 303 stainless steel, 316 stainless steel, 2024 aluminium, 1215 lead-free steel and acetal plastic variants.

Ruland Manufacturing threaded, two-piece shaft collars have higher axial holding power than round bore shaft collars of a similar size. They are well suited for guiding, spacing, stopping, mounting & component alignment. These units feature double-tapped threads to ensure a precise and burr-free finish that allows easy installation & removal, and a proper fit. These RoHS 3 & REACH compliant units feature 303 stainless steel / 1215 lead-free steel construction to offer increased holding power and handle operating temperatures ranging between -40 and 350 deg Fahrenheit. They come with forged screws that test beyond ANSI standards, offering maximum holding power.

Two-piece shaft collars from Ruland Manufacturing feature D-bores to mate to D-shafting for allowing maximum holding power. They come in a clamp design that does not mar the shaft and allows easy removal & indefinite adjustments. These units are integrated with mated halves to offer a proper fit & alignment. The forged screws test beyond ANSI standards, offering maximum holding power. These RoHS 3 and REACH compliant units feature 303 stainless steel / 1215 lead-free steel construction for increased holding power. They can handle operating temperatures ranging between -40 and 350 deg Fahrenheit.

Ruland Manufacturing one-piece, double-wide shaft collars have higher axial holding power than a round bore of equivalent size. They are ideal for guiding, spacing, stopping, mounting & component alignment. These units feature 2024 aluminium / 303 stainless steel / 1215 lead-free steel construction to offer added holding power. The clamp design does not mar the shaft, is easy to remove and allows indefinite adjustments. They are equipped with forged screws that test beyond DIN 912 12.9 standards to offer maximum holding power. All units are stamped with bore size for easy identification.