Electromagnetic Lock Power Supplies

Altronix access power controllers convert one, 12V to 24V voltage input into four independently controlled, fuse protected & auto-resettable outputs. They are powered by one common power source, providing power for both the board operations & locking devices and the outputs operate in both Fail-Safe & Fail-Secure modes for an adjustable voltage output. These UL-listed devices come with red & green visual indicator LEDs indicating triggered outputs & FACP (fire alarm control panel) disconnections, respectively and are integrated with individually selectable fire alarm disconnect interfaces (latching or non-latching), for all the four outputs that enable emergency egress, alarm monitoring & to trigger other auxiliary devices. Choose from a broad range of these controllers, available in phenolic, fibreglass and steel constructions to withstand rigorous environments.

Altronix access power controllers with power supplies / chargers are used for distributing power to access control systems and compatible accessories. These power controllers convert a 115VAC, 50 / 60Hz input into 16 independently controlled 12 or 24VDC controlled, fuse protected outputs. The outputs of these controllers are activated by normally closed or normally open dry trigger inputs from an access control system, PIR, card reader, keypad or push butto. They can be operated in both Fail-Secure & Fail-Safe modes for adjustable voltage output. These controllers provide thermal overload & short circuit protection and can withstand temperatures ranging from 32 to 120 degrees F.

Altronix off-line power supplies / chargers are designed for applications requiring additional power, such as security systems and access controls. These power supplies / chargers feature phenolic / fibreglass construction for mechanical strength & corrosion resistance. They are equipped with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. These power supplies / chargers offer relative humidity up to 85% (+/- 5%).

Altronix triple output power supplies / chargers are used with access control systems & accessories and convert 115VAC / 60 Hz input voltage into three individually PTC protected, 5VDC, 12VDC & 24VDC regulated output voltages. They feature steel construction to withstand corrosion and are compatible with sealed, lead acid or gel type batteries. These UL-listed chargers have battery percentage displays and feature low battery supervisions through form C contacts to trigger reporting or signalling devices. They prevent AC failures due to overvoltage & overcurrent faults and are integrated with LED indicators, indicating triggered DC outputs and operate on temperatures ranging from 0 degree Celsius to 49 degrees Celsius. Variants are available in enclosure depths of 3.25 and 4.50 inches.

Altronix ACM Series power supplies / chargers are ideal for switching and distributing power to access control systems and accessories. They convert a 115VAC, 60Hz input into eight independently controlled 12VDC or 24VDC fuse protected outputs. These power outputs can be converted to dry form C-contacts and are activated by open collector sinks or open dry trigger inputs from card readers, access control systems, push button and keypads. They route power to a variety of access control hardware devices including mag locks and magnetic door holders. The outputs operate in both Fail-Safe and Fail-Secure modes for an adjustable voltage output. The FACP (fire alarm control panel) interfaces enable emergency egress, alarm monitoring & to trigger other auxiliary devices. The fire alarm disconnects are individually selectable for any or all of the eight outputs along with relay indicators to prevent overvoltages & overcurrent faults.

Altronix open frame transformers are used to power heavy electronic equipment such as security, access control & surveillance devices. These step down transformers reduce voltage and increase amperage output proportionally. They are fitted inside steel angle frames for easy mounting on terminal blocks, rail terminals and stud connections. Choose from a wide range of these open frame transformers, also available with enclosure boxes for protection.

Altronix backplanes are ideal for trove enclosures that accommodate & easily integrate power supplies / chargers with mercury power boards, access controllers & sub-assemblies. They feature galvanised steel construction for ease of inspection, tough coating & corrosion resistance and include mounting hardware for easy installation. Further, these backplanes simplify wire management & board layouts, as well as minimise labour costs & installation time.

Altronix dual P/S access power controllers are used for distributing and switching power to access control systems and related accessories. They convert a 120VAC, 60Hz input into 16 independently controlled 12VDC & 24VDC fuse protected outputs. These Fail-Secure / Fail-Safe power outputs are activated by a normally open (NO) dry trigger or an open collector sink input. These access power controllers come integrated with built-in chargers for sealed lead acid or gel batteries and are capable of being operated at temperatures ranging from 0 to 49 degrees C.

Altronix SFP transceivers are used for connecting a copper or fibre-optic cable for data communication & telecommunication applications. These SFP devices feature embedded LINQ technology that allows monitoring, controlling & reporting power, and a built-in charger for sealed gel or lead acid batteries. These SFP transceivers provide relative humidity up to 85% (+/- 5%) and are capable of being operated at temperatures ranging from - 40 to 167 degrees F.

Altronix NetWay midspans provide power and pass data for PoE and PoE+ compliant cameras / edge devices. These network managed midspans feature a battery charger for applications requiring backup. They are integrated with embedded LINQ technology to monitor, control and report power & diagnostics. This technology also provides local and / or remote access to critical information via LAN / WAN. These units feature yellow & green LED visual indicators to convey IP link and port status.

Altronix passive UTP transceiver hubs feature integral camera power to transmit UTP video, RS422 / RS485 data and power over a single CAT-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to protect from voltage spikes. The video transmission range is up to 750 ft per channel. They are compatible with AC and / or DC fixed or PTZ cameras when utilising Altronix HubWayAv, HubWayAv2, HubWayDv or HubWayDvi video baluns / combiners.

Altronix NetWay midspans / injectors provide pass data & power for PoE compliant cameras or edge devices, located up to 100 meters. They also provide auto detection & protection to legacy, non-PoE devices. They are compatible with the brand's NetWayXT repeater modules for extending distance up to 600 meters and offer up to 30W volt full power per port. These UL-listed devices enable programming of port monitoring & PoE shutdown during LAN or laptop connections and feature illuminated master power disconnect, circuit breakers with manual reset switches for default settings. Further, they have LED ports for proper point-to-point functioning and allow Cat5 cables for ethernet connections up to a distance of 100 meters, ensuring high speed transfers. Choose from a wide range of these devices, available in 8 and 16 port variants.

Altronix NetWay midspans provide power and pass data for PoE and PoE+ compliant cameras / edge devices. These units additionally provide automatic detection and protection of legacy non-PoE cameras. These midspans have 8 or 16 ports in a space-saving, 19 inch rack mount chassis to allow easy rack and shelf mounting. They feature easy plug and play installation for user convenience and LED indicators to convey port status.

Altronix 24 hour 365 day event timers are designed for security, access control, home & building automation, and lighting control applications. These timers are integrated with independently controlled form C relay contacts to provide latching & momentary operations during a programmed schedule. They feature an EE Prom memory that prevents loss of programming in case of power failure. They have block programming capacity of accommodating a total of 350 events per week. These timers are made of steel / phenolic / fibreglass for high mechanical strength & corrosion resistance, and can be operated at temperatures ranging from -20 to 49 degrees C.

Altronix offers power supply units to provide power via 4 protected outputs for CCTV cameras, heaters and video accessories. These CCTV power supplies come with three Class 2 rated power limited outputs that are PTC protected to offer resettable overcurrent protection. These units feature a NEMA 4 rated enclosure for outdoor use. These units are integrated with an illuminated master power function to disconnect the circuit breaker with a simple manual reset.

Altronix multi-output power supply chargers convert 115V AC, 60 Hz input into four, 12VDC or 24VDC, Class 2, power outputs. They feature filtered & electronically regulated outputs for a smooth DC power supply and provide protection from short circuits & thermal overloads. These devices offer automatic switch overs to stand-by batteries during AC failures and have built-in chargers for sealed, lead acids or gel type batteries. The visual relay indicators prevent overvoltage & overcurrent faults. They provide low battery supervisions through form C contacts to trigger reporting or signaling devices. Choose from a broad range of these chargers having operating temperatures ranging from 0 degree to 49 degrees Celsius.

Altronix access power distribution modules with power supplies / chargers are used for powering, installing & repairing access control systems and accessories. These multi-output power supplies can be operated in both Fail-Secure & Fail-Safe modes for adjustable voltage output. These controllers provide thermal overload & short circuit protection and can house gel or sealed lead acid batteries in the built-in charger. They deliver relative humidity up to 85% (+/- 5%) and are available in enclosure widths of 12 & 13 inches.