Alignment Tools | Raptor Supplies

Alignment Tools

Filter

MOODY TOOL -

Spring Allignment Tool

Moody Tools spring alignment tool is used for positioning springs in confined spaces and can also be used to make small adjustments in electronic circuits. These tools are available in steel and brass materials and feature a knurled handle that ensures proper grip. These alignment tools are available in different tip shapes (push / pull / lifter / hook) and lengths.

MOODY TOOL 49-8250A
MOODY TOOL 49-8251B
MOODY TOOL 49-8252C
MOODY TOOL 49-8190D
MOODY TOOL 49-8200E
MOODY TOOL 51-1856F
MOODY TOOL 55-1862G
MOODY TOOL 51-1850H
MOODY TOOL 51-1851I
StyleModelColorHead TypeLengthMaterialNumber of PiecesOverall LengthTypePrice
A49-8250-Flat---4"-€17.09
B49-8251-Angled---4.25"-€17.09
C49-8252-Offset---4.25"-€17.09
D49-8190---Chrome Plated Brass14.875" to 17.5"-€22.47
E49-8200---Nickel Plated Brass23.875"-€16.11
F51-1856Nickel-7"High Carbon Steel1-Combination€6.42
G55-1862Nickel-8 3/4" to 26"High Carbon Steel6-Telescoping€32.93
H51-1850Plated-8/12"Steel1--€5.85
I51-1851Plated-6"Steel1--€5.33
I51-1852Plated-6"Steel1--€5.34
ACCUSHIM -

Shaft Alignment System

Accushim shaft alignment systems enhance the operating life span of rotating machinery. They compute alignment corrections upto 0.0001 of an inch and decrease vibrations and energy utilization. These systems employ a user-friendly alingment computer and stainless steel alignment hardware for precise and quick shaft alingment. They also feature completely jeweled, stabilised face dial indicators and firm hardware to decrease sag errors over wide couplings.

ACCUSHIM SA-2A
StyleModelPrice
ASA-2-
RFQ
AHA-2€1,489.09
RFQ
AMPCO METAL -

Offset Pin Pointed

AMPCO METAL P-8206A
StyleModelTip SizePrice
AP-82061"€347.21
AP-82081.375"€510.44
AP-82023/4"€241.68
AP-82005/8"€213.44
AP-820415/16"€345.29
JONARD -

Orange Sticks

JONARD S-389M/100A
JONARD S-389/10B
JONARD S-389M/10C
StyleModelItemMaterialPrice
AS-389M/100Orange StickBirch Wood€87.85
BS-389/10Orange SticksWood€8.73
CS-389M/10Orange Sticks ModifiedWood€11.71
ACCUSHIM -

Rods

Accushim SHRF Series rods allow the operator to lower or raise the rod height (above the shaft or coupling) for precise shaft alignment. The height of the short tapped rods can be decreased from 8.5 to 5 inches and are suitable for confined spaces where side-to-side rotation is limited. For increasing the height, tall tapped rods are utilised and can be extended from 8.5 to 12 inches, making them ideal for direct mounting on the shaft & to easily rise above hubs / couplings with larger diameters. Choose from a wide range of these rods, available in 5 and 12 inch heights.

ACCUSHIM SHRF-5A
ACCUSHIM SHRF-12B
StyleModelSizePrice
ASHRF-55" x 12 mm€381.82
RFQ
BSHRF-1212" x 12 mm€429.55
RFQ
JONARD -

Pull Hooks

JONARD M-120/5A
JONARD M-130/SX5B
StyleModelLengthPrice
AM-120/56"€26.89
BM-130/SX58"€29.33
HILMAN ROLLERS -

Alignment Bars

HILMAN ROLLERS KD-BAR-ALGN-2x60A
StyleModelPrice
AKD-BAR-ALGN-2x60€241.98
ABDS4-SPRDR-72€160.36
RFQ
JONARD -

Push Hook Steel Flat 6 Inch - Pack Of 5

Push Hook Steel Flat 6 Inch - Pack Of 5
ModelItemPrice (ex. VAT)
M-125/5AC3GCK€27.21
JONARD -

Alignment Kit 5 Piece Non-conductive

Alignment Kit 5 Piece Non-conductive
ModelItemPrice (ex. VAT)
TK-AT5AC3GCR€20.13
JONARD -

Spudger Plastic Pointed/flat - Pack Of 10

Spudger Plastic Pointed/flat - Pack Of 10
ModelItemPrice (ex. VAT)
AT-3112/10AC3GCT€70.05
JONARD -

Trimpot Plastic Hex/flat 5 Inch - Pack Of 10

Trimpot Plastic Hex/flat 5 Inch - Pack Of 10
ModelItemPrice (ex. VAT)
AT-3767/10AC3GCU€86.76
JONARD -

Push And Pull Hook Steel 7 Inch - Pack Of 5

Push And Pull Hook Steel 7 Inch - Pack Of 5
ModelItemPrice (ex. VAT)
M-137/5AC3GCN€27.21
JONARD -

Captive Spring Hook Steel 7 Inch - Pack Of 5

Captive Spring Hook Steel 7 Inch - Pack Of 5
ModelItemPrice (ex. VAT)
M-145/5AC3GCP€94.04
JONARD -

Clip Setter Steel Set/remove 6 3/4 In

Clip Setter Steel Set/remove 6 3/4 In
ModelItemPrice (ex. VAT)
CS-1022AC3GCQ€27.08
MOODY TOOL -

Threaded Spring Tool Kit Light 8pc

Threaded Spring Tool Kit Light 8pc
ModelItemPrice (ex. VAT)
55-1857AE9PUW€26.57
MOODY TOOL -

Spring Positioner Set, 4 Pc., Hook/Lifter, Heavy Push, Adjusting Pull

Spring Positioner Set, 4 Pc., Hook/Lifter, Heavy Push, Adjusting Pull
ModelItemPrice (ex. VAT)
58-7592CE2GUH€15.23
See Details
MOODY TOOL -

Spring Positioner Set, 4 Pc., Hook/Lifter, Heavy Push, Heavy Pull

Spring Positioner Set, 4 Pc., Hook/Lifter, Heavy Push, Heavy Pull
ModelItemPrice (ex. VAT)
58-7594CE2GUK€20.26
See Details
ACCUSHIM -

Belt Hog Pulley Alignment Tool

Belt Hog Pulley Alignment Tool
ModelItemPrice (ex. VAT)
LP-1CE8EUH€1,489.09
See Details
ACCUSHIM -

Starter Kit, Shaft to Shaft Alignment, With Dial Indicators, 3.5 Inch Max Shaft Dia.

Starter Kit, Shaft to Shaft Alignment, With Dial Indicators, 3.5 Inch Max Shaft Dia.
ModelItemPrice (ex. VAT)
SK-2D: Starter KitCE8EUA€668.18
See Details
JACKSON SAFETY -

Centering Pin

Centering Pin
ModelItemPrice (ex. VAT)
14798CF4RRU€33.60
See Details
ACCUSHIM -

Side Align Horizontal Move Kit

Side Align Horizontal Move Kit
ModelItemPrice (ex. VAT)
SAS-A1CE8EUJ€988.91
See Details
12

Alignment Tools

Alignment tools are ideal for lifting / aligning / removing small springs, fasteners & machinery parts in electrical & automotive maintenance operations. Raptor Supplies offers a wide array of Ampco, Moody Tools & Jonard alignment tools having wood / brass / high carbon steel / plastic / steel construction for resisting bending / breaking. Selected models from Ampco feature an L-shaped design for providing maximum grip & preventing slippage and have spark-proof & non-magnetic construction for use in environments having traces of combustible gases / compounds. Choose from an extensive range of these alignment tools, available in flat, offset & angled head options on Raptor Supplies.

Explore More