| Item | Submersible Effluent Pump |
| Alarm Included | No |
| Amps | 10.2A |
| Base Material | Cast Iron |
| Bearing Type | Ball |
| Body Dia. | 12 3/4" |
| Cord Length | 20 ft. |
| Diameter | 12 3/4" |
| Discharge Size | 2" |
| Duty Cycle | Intermittent |
| Flow Rate @ 10 Ft. | 61 GPM |
| Flow Rate @ 20 Ft. | 60 GPM |
| Flow Rate @ 25 Ft. | 59 GPM |
| Flow Rate @ 30 Ft. | 58 GPM |
| Flow Rate @ 40 Ft. | 55 GPM |
| Flow Rate @ 5 Ft. | 61 GPM |
| Flow Rate @ 50 Ft. | 50 GPM |
| Flow Rate @ 60 Ft. | 39 GPM |
| Flow Rate @ 70 Ft. | 23 GPM |
| Flow Rate @ 80 Ft. | 10 GPM |
| Frequency | 60 Hz |
| Housing Material | Cast Iron |
| Hp | 1 hp |
| Impeller Material | Bronze |
| Max. Dia. Solids | 3/4" |
| Max. Flow Rate @ 15 Ft. | 61 GPM |
| Max. Head | 86 ft. |
| Max. Liquid Temp. | 130°F |
| Max. Temp. | 130°F |
| Min. Sump Pit Dia. | 24" |
| Min. Water Depth | 24" |
| Motor Type | Permanent Split Capacitor |
| Off Point | 5 1/4" |
| On Point | 15 3/4" |
| Operation Type | Automatic |
| Outlet Size | 1 1/2" |
| Outlet Type | FNPT |
| Overall Height | 19 5/16" |
| Phase | 1 |
| Rpm | 3450 RPM |
| Shaft Material | Carbon Steel |
| Shaft Seal Material | Carbon Ceramic |
| Switch Actuation | Vertical Float |
| Switch Electrical Connection | Integral |
| Switch Type | Vertical |
| Thermal Protection | Yes |
| Top Material | Cast Iron |
| Voltage | 230V AC |
| Width | 10 11/32" |
| Agency Compliance | CSA, UL |
| Body Material | Cast Iron |
| Discharge | 1 1/2" FNPT |
| Flow Rate @ 10 Ft. Of Head | 61 GPM |
| Flow Rate @ 15 Ft. Of Head | 61 GPM |
| Flow Rate @ 20 Ft. Of Head | 60 GPM |
| Flow Rate @ 40 Ft. Of Head | 55 GPM |
| Flow Rate @ 60 Ft. Of Head | 39 GPM |
| Flow Rate @ 80 Ft. Of Head | 10 GPM |
| Hz | 60 Hz |
| Manufacturers Warranty Length | 1 yr. |
| Max. Diameter Solids | 3/4" |
| Minimum Water Depth | 24" |
| Phase - Pumps | 1 |
| Rated Voltage | 230V AC |
| Shaft Seal Material - Pumps | Ceramic, Carbon |
| Width At Widest Point | 10 11/32" |
