Effluent Pumps

Little Giant submersible effluent pumps are ideal for removing effluents, dewatering and transferring gray water (household wastewater ejected from sink or bath) into a septic or sewage system for water treatment. These pumps are made of cast iron / polypropylene base material for excellent deformation & wear resistance. They further have high head design for pushing treated greywater out to a faraway drain field. They feature PSC (permanent split capacitor) motors with thermal overload protection to dissipate heat generated during the operation and produce low starting current & torque, thereby saving energy costs. Choose from a wide range of these pumps, designed to handle effluent, available in 1750 and 3450 RPM motor speed variants.

Dayton effluent pumps are suitable for draining gray water containing small solids (up to 3/4 inch size) from a septic tank and out to a leach field. These submersible pumps feature semi-open non clog or vortex impellers for producing a large flow rate and nitrile rubber / silicon carbide shaft seals for preventing loss / escape of fluid from a rotating or reciprocating shaft, as well as providing lubrication for smooth movement. They operate intermittently / continuously (depending on application) and are equipped with a float switch for automatic pump functioning for draining out water when the septic tank is full. They also feature overload thermal protection for preventing the pump from overheating. Choose from a wide range of these submersible effluent pumps, available in 4/10, 1/3, 1/2 and 1 HP motor ratings.

Little Giant 9ENH Series effluent pumps are ideal for continuous duty operation in wastewater removal, dewatering and water transfer applications. They feature permanent split capacitor motors for smooth acceleration. These energy-saving pumps draw low current and have multiple switches for automatic operation. They have 1-1/2 inch FNPT discharge connections to pump liquids at 140 degrees Fahrenheit liquid temperature. These CSA listed pumps are capable of handling solids having diameters up to 3/4 inches.

Little Giant 9EN Series effluent pumps offer continuous duty operation in dewatering, wastewater removal and water transfer applications. They have 1-1/2 inch FNPT discharge connections to pump liquids at 60 degrees Celsius liquid temperature. These CSA listed, energy saving pumps draw low current, irrespective of handling solids having diameters up to 3/4 inches. They offer multiple switches for automatic operation and feature permanent split capacitor motors for smooth acceleration.

Little Giant 10ENH Series effluent pumps are designed for continuous duty use in water transfer, dewatering and effluent wastewater removal applications. They are submerged in water to cool the pump motors for long term operation without overheating, and have energy efficient PSC motors with thermal overload protection. These pumps can handle liquids up to 200 deg Fahrenheit and solids having diameters up to 3/4 inches. They feature epoxy coated cast iron housing to withstand heavy loads, resist corrosion & dampen vibrations. The ceramic shaft seals and upper & lower ball bearings allow smooth operation and comprise FNPT discharges for effective sealing.