| Item | Milling Insert |
| Lead Angle | 75° |
| Mounting Style | Screw Clamp |
| Style | XNGU |
| Ansi Code | XNGU1501ERML |
| Chip-breaker | Yes |
| Chip-breaker Code | ML |
| Chip-breaker Style | Double Sided |
| Clearance Angle | 0° |
| Corner Radius | 1/64" |
| Cutting Application | Milling |
| Cutting Direction | Right Hand |
| Cutting Edge Length | 15.3 mm |
| Finish - Machining | AlTiN |
| For Toolholder | VSM490D150Z05S050XN15, VSM490D200Z05S075XN15, VSM490D200Z06S075XN15, VSM490D250Z05S075XN15, VSM490D250Z06S075XN15, VSM490D250Z07S100XN15, VSM490D300Z07S100XN15, VSM490D300Z09S100XN15, VSM490D400Z08S150XN15, VSM490D400Z11S150XN15, VSM490D500Z09S150XN15, VSM490D500Z12S150XN15, VSM490D600Z10S200XN15 |
| For Use With | VSM490 15 Series Shoulder Mills |
| Hole Type | 40° to 60°Double Countersink Hole |
| Included Angle | 90° |
| Inscribed Circle | 0.394" |
| Insert Holding Type | Screw Clamp |
| Insert Size | 15T604 |
| Insert Style | XNGU |
| Iso Number | XNGU15T604ERML |
| Manufacturer Grade | WS40PM |
| Material - Machining | Carbide |
| Measurement System | Fractional Inch |
| Mounting Hole Dia. | 4.65 mm |
| Number Of Cutting Edges | 4 |
| Primary Material Application | Nickel, Stainless Steel, Steel, Titanium |
| Primary Material Application Iso Code | M, P, S |
| Rake | Positive |
| Secondary Material Application | Steel |
| Secondary Material Application Iso Code | P |
| Series | VSM490-15 |
| Shape | Rectangle |
| Thickness | 0.271" |
| Through Hole Inside Dia. | 4.65 mm |
| Width | 10 mm |
| Wiper Insert | Yes |
