Utility/Dewatering Pumps
Utility / dewatering pumps are used to remove or level the water table from mines, basements and backyards by the method of centrifugation. These pumps feature an impeller which creates a
...Read moreUtility Pumps
A
B
CPony Pumps
A
B
CUtility Pumps
A
BUtility Pumps
A
B
CPlug In Utility Pumps, Stainless Steel Base
Dayton plug-in utility pumps are used for draining excess rainwater from window wells & stairwells, and removing standing water from yards & flooded basements. These pumps feature a stainless steel base for structural rigidity and 3-conductor SJTOW cords that are resistant to oil & water. They are integrated with dual ball bearings for less rotational friction while running at a maximum speed of 3450 rpm. These dewatering pumps are capable of withstanding liquid temperatures up to 104 degrees F.
Dayton plug-in utility pumps are used for draining excess rainwater from window wells & stairwells, and removing standing water from yards & flooded basements. These pumps feature a stainless steel base for structural rigidity and 3-conductor SJTOW cords that are resistant to oil & water. They are integrated with dual ball bearings for less rotational friction while running at a maximum speed of 3450 rpm. These dewatering pumps are capable of withstanding liquid temperatures up to 104 degrees F.
A
BSubmersible Dewatering Pump
A
BPlug In Utility / Dewatering Pumps
Dayton plug-in utility / dewatering pumps are used to transfer moderate amounts of water in areas where electrical outlets are not present. They feature stainless steel / polypropylene construction to resist chemicals & moisture. These pumps drain standing water down to 3/8 inches depth, for dewatering window wells, basements, ponds, stock tanks & rooftops. They are equipped with double ball bearings to bear radial & axial loads in both directions, and are available in cord lengths of 10 & 20 feet.
Dayton plug-in utility / dewatering pumps are used to transfer moderate amounts of water in areas where electrical outlets are not present. They feature stainless steel / polypropylene construction to resist chemicals & moisture. These pumps drain standing water down to 3/8 inches depth, for dewatering window wells, basements, ponds, stock tanks & rooftops. They are equipped with double ball bearings to bear radial & axial loads in both directions, and are available in cord lengths of 10 & 20 feet.
A
BDewatering/Utility Pumps
A
B
C
DSubmersible Sump Pumps, Ball Bearings, 20 Feet Cord Length
Little Giant submersible sump pumps are designed for removing standing / accumulated water from a sump basin in the basement or crawl space and transfer water to the sewer line. These units come with stainless steel housing for handling corrosive fluids and semi-open impeller design for handling liquids with solid particles. They are completely submerged underwater and start operating the motor automatically when the sump pit water rises to an emergency level and stops the pump when the water has drained down to normal level. Choose from a wide range of these submersible sump pumps, available in 12 and 14 inch heights.
Little Giant submersible sump pumps are designed for removing standing / accumulated water from a sump basin in the basement or crawl space and transfer water to the sewer line. These units come with stainless steel housing for handling corrosive fluids and semi-open impeller design for handling liquids with solid particles. They are completely submerged underwater and start operating the motor automatically when the sump pit water rises to an emergency level and stops the pump when the water has drained down to normal level. Choose from a wide range of these submersible sump pumps, available in 12 and 14 inch heights.
A
BAutomatic Submersible Dewatering Pump
A
BConstruction Site/Residential Dewatering Pump
A
B
C
D
E
F
G
H
I| Style | Model | Height | GPM of Water @ 20 Ft. of Head | Amps | Cord Length | Cord Size | Diameter | GPM of Water @ 10 Ft. of Head | GPM of Water @ 15 Ft. of Head | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | LB-480 | €760.96 | |||||||||
| B | LSR2.4S-60 | €970.76 | |||||||||
| C | HS2.4S-62 | €624.23 | |||||||||
| D | HS3.75S-62 | €1,213.96 | |||||||||
| E | HSZ2.4S-62 | €734.16 | |||||||||
| F | HSD2.55S-62 | €1,375.45 | |||||||||
| G | HSZ3.75S-61 | €1,262.59 | |||||||||
| H | NK2-22 | €4,745.25 | |||||||||
| I | NK2-22L | €5,361.65 |
Utility Pump
A
BHex Bolts
Allegro hex bolts are suitable for fastening components in sludge dewatering pumps used for wastewater transfer & dewatering applications. Their 304 stainless steel construction prevents highly abrasive environments from damaging / wearing the fastener. Selected models having washers are also available.
Allegro hex bolts are suitable for fastening components in sludge dewatering pumps used for wastewater transfer & dewatering applications. Their 304 stainless steel construction prevents highly abrasive environments from damaging / wearing the fastener. Selected models having washers are also available.
ADewatering Pumps
A
BImpellers
Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.
Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.
APlug-In Utility Pump
| Model | Item | Price (ex. VAT) | |
|---|---|---|---|
| 1DW51D1EA | CP6PRP | €1,931.21 |
Cordless Transfer Pump Kit, 18 V, 8 Gpm, 75 Ft Of Head, Bare Tool/Battery
| Model | Item | Price (ex. VAT) | |
|---|---|---|---|
| 2771-20, 48-11-1835 | CT3NCZ | €542.27 |
Sump Pump
| Model | Item | Price (ex. VAT) | |
|---|---|---|---|
| S38-2 | CR9JGP | €307.10 |
Pump Accessory Kit
| Model | Item | Price (ex. VAT) | |
|---|---|---|---|
| K001499 | CR9JEW | €60.03 |
Plug-In Utility Pump
| Model | Item | Price (ex. VAT) | |
|---|---|---|---|
| 2DW1012 | CP6PRX | €2,886.32 |
Plug-In Utility Pump
| Model | Item | Price (ex. VAT) | |
|---|---|---|---|
| 2DW0512 | CP6PRV | €1,730.14 |
Utility/Dewatering Pumps
Dewatering pumps are used to remove or draw groundwater from mines, basement and backyard, as well as reduce flooding by the method of centrifugation and level the water table. Raptor Supplies offers a wide range of these utility / dewatering pumps from brands like Allegro, Dayton, Little Giant Pumps, Tsurumi and Rule. These pumps feature an impeller which creates a vortex to suck the air out of the hose and, as a result, forces the water to rise to the pump with the help of atmospheric pressure. These horizontally installed pumps use electric motors with a maximum 3 HP power rating and come with a mechanical seal to prevent water ingress. These pumps are available in cord lengths ranging from 8 to 50 inches on Raptor Supplies.
Frequently Asked Questions
What maintenance is required for dewatering pumps?
- Clean the pump and hoses regularly to eliminate debris, sediment, or blockages that may hinder the pump's effectiveness.
- Inspect the intake and discharge hoses of the pump for any indications of damage, such as cracks or leaks. Replace any impaired hoses as necessary.
- Examine the impeller or propeller of the pump for any obstructions or signs of wear. Clean or replace the impeller if required.
Do these sludge submersible dewatering pumps offer motor protection?
Yes, Allegro Safety dewatering pumps have built-in thermal and amperage sensing protectors to prevent motor failure due to overloading or accidental run-dry conditions. This protection adds an extra layer of safety and helps prolong the lifespan of the motor.
In what cord lengths are these dewatering pumps available on Raptor Supplies?
These pumps are available in cord lengths ranging from 8 to 50 inches on Raptor Supplies.
What is the maximum liquid temperature permissible in dewatering pumps?
They can withstand liquid temperatures up to 150 degrees F.
Explore More
- Distribution Equipment
- Temperature and Humidity Measuring
- Signs
- Speed Reducers
- Conduit Mounting
- Sensor Cordsets
- Pallet Lifters and Tilters
- Wet Mops
- Battery Operated Sump Pumps
- IEC Magnetic Contactors
- BURNDY Type W Hydraulic Crimping Tools W/ Dies
- INNOVATIVE COMPONENTS 3/8", 1/2", M10 Thread Size Soft Touch Shift Knob
- SAFEWAY Hydraulic Quick Coupler, Carbon Steel, 1/4
- INSTOCK Laboratory Utility Deep Ledge Cart, Gray
- DURHAM MANUFACTURING Platform Trucks, Adjustable Height
- DAYTON Hardwares
- RACO Conduit Connectors
- REGAL Taper Pipe Taps, Interrupted Thread, NPT, Bright
- MILWAUKEE Snap Off Utility Knives
- CHICAGO PNEUMATIC Seats