| Item | Electric Operated Drum Pump |
| Cord Length | 16 ft. |
| Def Compatible | No |
| Diesel Exhaust Fluid Compatible | No |
| Discharge Connection Type | Tri Clamp |
| Discharge Tube Inside Dia. | 1" |
| Discharge Tube Outlet I.d. | 1" |
| Discharge Tube Outlet O.d. | 1 1/2" |
| Discharge Tube Outside Dia. | 1 1/2" |
| Display Qty | 1 |
| Duty | Intermittent |
| Duty Cycle | Intermittent |
| Features | Hygienic Design, Quick Tear Down |
| Food Grade | Yes |
| For Container Size | 275 gal. |
| For Container Type | Tote |
| For Media Type | Acetic Acid, Ammonia, Ammonium Hydroxide, Antifreeze, Calcium Chloride, Citric Acid, Ethylene Glycol, Glycerin, Hydraulic Oil, Methyl Chloride, Motor Oil, Nitric Acid, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Trichlorethylene, Water |
| For Use With | SP-ENC-2-V/SP-8850-47 |
| Frequency | 50/60 Hz |
| Housing Grade | Grade 316 |
| Housing Material | Stainless Steel |
| Includes Bung Adapter | No |
| Includes Discharge Hose | No |
| Includes Nozzle | No |
| Includes Suction Tube | Yes |
| Length | 60" |
| Max. Flow Rate | 31 GPM |
| Max. Head | 23 ft. , 25 ft. |
| Max. Head Pressure | 11 psi |
| Max. Oil Flow | 7 GPM |
| Max. Outlet Pressure | 11 psi |
| Max. Temp. | 175°F |
| Max. Viscosity | 1000 cPS |
| Metered | No |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Hp | 1 1/10 hp |
| Motor Type | AC Brush |
| Noise Level | 88 dB , 88 dBA |
| Nominal Voltage | 220V AC |
| Package Type | Basic Pump Without Discharge Hose |
| Phase | 1 |
| Plug Type | CEE 7/7 |
| Power Source | Electric |
| Runs Dry | Yes |
| Seal Material | Sealless |
| Self Priming | Yes |
| Self-priming | Yes |
| Suction Tube I.d. | 1 3/8" |
| Suction Tube Inside Dia. | 1 1/3" |
| Suction Tube Length | 47" |
| Suction Tube Material | Stainless Steel |
| Suction Tube O.d. | 1 5/8" |
| Suction Tube Outside Dia. | 1 3/5" |
| Thermal Protection | Yes |
| Variable Speed | Yes |
| Voltage Rating | 240V AC |
| Wetted Material | PTFE, Stainless Steel |
| Wetted Material Grade | Grade 316 |
| Adapter Material | 316 Stainless Steel |
| Agency Compliance | CE, FDA Compliant, 3A |
| Compatible Chemicals | Acetic Acid 20%, Acetic Acid 80%, Ammonia (Liquids), Ammonium Hydroxide, Antifreeze (Coolant), Calcium Chloride, Citric Acid 50%, Deionized Water, Ethylene Glycol, Fresh Water, Glycerin, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Methyl Chloride, Motor Oil, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Trichlorethylene (50%) |
| Discharge Tube Outlet Id | 1" |
| Discharge Tube Outlet Od | 1 1/2" |
| Frequency (hz) | 50/60 Hz |
| Full Load Amps | 5A |
| Housing Material - Pumps | Grade 316 Stainless Steel |
| Max. Fluid Temp. | 175°F |
| Max. Head - Pumps | 25 ft. |
| Motor Enclosure | TEFC |
| Not Recommended Chemicals | Acetic Acid (Glacial), Acetone, Chromic Acid 30%, Chromic Acid 50%, Cyclohexane, DEF, Diesel Fuel, Ethyl (Ethanol), Ethyl Acetate, Formaldehyde, Formaldehyde 40%, Formic Acid, Gasoline, Heptane, Hexane, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Methyl (Methanol), Methyl Ethyl Ketone (MEK), Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10%-75%), Sulfuric Acid (75%-100%), Toluene, Xylene |
| Number Of Phases | 1 |
| Overall Length | 60" |
| Pump Package Type | Basic Pump Without Discharge Hose |
| Rated Voltage | 240V AC |
| Suction Tube Id | 1 3/8" |
| Suction Tube Od | 1 5/8" |
| Wetted Materials | 316 Stainless Steel, PTFE |
