PROTO sleever bar J2125 is an alignment pry unit for positioning, prying and aligning bolt holes in construction, maintenance & repair applications.
Features:
- J2125 PROTO sleever bar has forged high carbon steel construction for complete resistance against industrial abuse, as well as providing strength & durability.
- It has an angled, flattened end that acts as a lever to apply a significant amount of force between the objects.
- This unit has a 3/4-inch diameter with a pencil point tip end and a chiselled end.
- It protects against structural instability by prying the holes into alignment.
Standards and Approvals:
Frequently Asked Questions:
Q. What are the types of pry bars?
A.
- Alignment pry bar
- Claw pry bar
- Digging pry bar
- Flat pry bar
- Gooseneck pry bar
- Heavy-duty pry bar
- Moulding pry bar
- Rolling head pry bar
Q. What is the difference between a crowbar and a pry bar?
A. Pry bars are generally thinner and flatter than crowbars, making them ideal for intricate tasks.
Q. How to remove nails with a head?
A.
- Place the flat end of the straight side of the pry bar in a way that the fissure should be on either side of the head of the nail.
- Hammer the pry bar lightly so that it bites into the wood and gets under the nail head.
- Gently press downwards on the free end for lifting up the nail head.
Q. How to remove headless nails?
A.
- Keep a block of wood next to the nail to ensure leverage for the hammer.
- Position a pry bar or hammer around the nail.
- Clamp the locking pliers on the nail to prevent the slipping of pry bar or hammer.
- Pull back on the pry bar or hammer to remove the nail.
