This mobile digital plan station is a professional job box ideal for users requiring data connectivity on the worksite.
Features:
- This mobile digital plan station has a 14-gauge-thick steel floor and 16-gauge steel body construction for structural rigidity.
- It has a power crew including 4 GFCI outlets for safe power, a 32-inch TV monitor and UPS backup power supply to deliver electricity for up to thirty minutes during a power outage.
- This industrial cabinet of the storage box is customisable, enabling users to set up digital systems.
- This 150 lb load-bearing unit is equipped with a drawer to provide independent locking storage and 4-inch wheel casters for smooth mobility.
- It features powder-coated finish to resist corrosion and weighs up to 320 lb when fully loaded with electronics.
Frequently Asked Questions:
Q. What is a TurnKey hub?
A. A TurnKey hub delivers an easy-to-use web interface to manage TurnKey cloud servers and backups.
Q. How to assemble mobile digital plan station?
A.
- Unbolt the padlock tab with a 1/2 inch wrench or socket.
- Place the latch rod in the 'latched' position.
- Mount 5/16 inch x 3/4 inch carriage bolt into the correct hole in the padlock tab.
- Install the padlock shackle into the padlock tab and secure it to the lock box using a locking nut.
- Prior to locking the padlock, open the cover and slide the latch rod into the 'open' position.
- Close the cover and move the latch rod to the 'latched' position.
Q. Which tools are required for installing this digital plan station?
A.
- 1/2 inch socket
- 5/16 inch socket
- Phillips head screwdriver
Q. How to install this digital plan station?
A.
- Remove the mounting bracket by eliminating two #10-24 x 3/4 inch screws, lock washers and flat washers using a 5/16 inch socket.
- Carefully set TV face down on a flat surface.
- Attach the wiring harness and the power supply for the TV.
- Place the mounting bracket and align it with the mounting holes on the back of the TV.
- Fasten the bracket to the TV by using four 1/4 inch lock washers, four M4 bolts and four #10 washers.
- Lift the mounting bracket & TV and hang on the notch in the channel by the hooks on the mounting bracket.
- Reattach the two screws, i.e. lock and flat washers, which were previously removed.