| Item | Centrifugal Pump |
| Amps | 42A |
| Best Efficiency Flow | 195 GPM |
| Best Efficiency Flow Range @ Head | 125 to 275 GPM @ 102 to 60 ft. |
| Best Efficiency Flow Rate @ Head | 195 GPM @ 103 ft. |
| Best Efficiency Head | 103 ft. |
| Compatible Discharge Pipe Size | 2 1/2" |
| Compatible Intake Pipe Size | 3" |
| Design | JM |
| Drain Plug | All Position |
| Duty Cycle | Continuous |
| For Use With Potable Systems | Yes |
| Frame | 213JM |
| Grade | Grade 316 |
| Height | 11 1/5" |
| Housing Material | Cast Iron |
| Hp | 7 1/2 hp |
| Impeller Dia. | 5 4/9" |
| Impeller Material | Bronze |
| Impeller Type | Closed |
| Inlet Pressure | 100 psi |
| Length | 25 1/2" |
| Max. Case Pressure | 175 psi |
| Max. Flow Rate | 250 GPM |
| Max. Flow Rate @ 100 Ft. | 162 GPM |
| Max. Flow Rate @ 40 Ft. | 315 GPM |
| Max. Flow Rate @ 50 Ft. | 300 GPM |
| Max. Flow Rate @ 60 Ft. | 282 GPM |
| Max. Flow Rate @ 70 Ft. | 260 GPM |
| Max. Flow Rate @ 80 Ft. | 234 GPM |
| Max. Flow Rate @ 90 Ft. | 200 GPM |
| Max. Flow Rate @ Head | 250 GPM @ 90 ft. |
| Max. Head | 115 ft. |
| Max. Liquid Temp. | 212°F |
| Max. Solid Dia. | 7/16" |
| Media Type | Water |
| Min. Flow Rate | 100 GPM |
| Min. Flow Rate @ Head | 50 GPM @ 118 ft. |
| Motor Enclosure Design | Open Dripproof |
| Motor Type | JM |
| Mounting Orientation | Horizontal |
| Phase | 1 |
| Port Rotation | 45 Deg. Increments |
| Rpm | 3500 RPM |
| Seal Application | Water |
| Seal Material | Buna Elastomer, Carbon Ceramic, Stainless Steel |
| Seal Type | Type 21 |
| Self Priming | Manual |
| Series | 3656 Series |
| Service Factor | 1.15 |
| Shaft Material | Stainless Steel |
| Shut Off Pressure | 175 psi |
| Specific Gravity | 1 |
| Type | Close Coupled |
| Voltage | 230V AC |
| Volute Material | Cast Iron |
| Wetted Material | Bronze, Buna N, Carbon Ceramic, Stainless Steel |
| Width | 9 2/3" |
| Compatible With Media Type | Water |
| Connection Type | NPT |
| Discharge Type | NPT |
| Flow Rate (maximum) | 250 GPM |
| Flow Rate (minimum) | 100 GPM |
| Frequency | 60 Hz |
| Horsepower | 7 1/2 hp |
| Maximum Feet Of Head | 115 ft. |
| Maximum Flow Rate @ 100 Feet Of Head | 200 GPM |
| Maximum Flow Rate @ 90 Feet Of Head | 250 GPM |
| Motor Enclosure | Open Dripproof |
| Nameplate Voltage | 230V AC |
| Overall Height | 11 1/5" |
| Overall Length | 25.5" |
| Overall Width | 9.7" |
| Priming | Manual |
| Pump Housing Material | Cast Iron |
| Rpm (maximum) | 3500 RPM |
| Solid Diameter (maximum) | 11/25" |
| Specific Gravity (maximum) | 1 xg |
| Standards | ANSI 61, NSF CERTIFIED |
