Item | Booster Pump |
Amps | 25/12.5 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 23 @ 180 Ft. |
Best Efficiency Range GPM @ Head | 32-16 GPM @ 143-198 Ft |
Diffuser Material | Cast Iron |
Duty | Continuous |
Frame | NEMA 56J |
GPM @ 25 PSI | 47 |
GPM @ 30 PSI | 44 |
GPM @ 35 PSI | 43 |
GPM @ 40 PSI | 41 |
GPM @ 50 PSI | 37 |
GPM @ 60 PSI | 33 |
GPM @ 80 PSI | 23 |
Height | 8 15/16" |
Housing Material | Cast iron |
HP | 2 |
Hz | 60 |
Impeller Material | Low Lead Brass |
Impeller Type | Closed |
Inlet | 1-1/2 FNPT |
Length | 21.375" |
Max. Case Pressure | 160 PSI |
Max. Fluid Viscosity | Clear Water |
Max. Inlet Pressure | 2 PSI |
Max. Liquid Temp. | 200 Degrees |
Max. Pressure | 98 PSI |
Max. Working Pressure | 98 PSI |
Min. Inlet Flow Required | 2 GPM |
Motor Ambient Temp. Rating | 65 Degrees C/149 Degrees F |
Motor Enclosure | ODP |
Motor RPM | 3450 |
Motor Type | ODP |
NEMA/IEC Frame | NEMA 56J |
Outlet | 1-1/4 FNPT |
Phase | 1 |
Plug or Connector Type | Direct Wire |
Seal Application | Water |
Seal Material | Stainless Steel, Buna N and Carbon/Silicon Carbide |
Seal Type | Mechanical |
Service Factor | 1.25 |
Shaft Material | Stainless Steel |
Stages | 3 |
Suction Lift | 25 Ft. |
Voltage | 115/230 |
Wetted Materials | Brass,CI,416 SS,Buna N,Carbon,Silicon Carbide,BR |
Width | 7" |