Item | Booster Pump |
Amps | 5.7/2.85 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 25 @ 130 Ft. |
Best Efficiency Range GPM @ Head | 35-15 GPM @ 96-146 Ft |
Diffuser Material | Cast Iron |
Duty | Continuous |
Frame | NEMA 56J |
GPM @ 25 PSI | 44 |
GPM @ 30 PSI | 40 |
GPM @ 35 PSI | 37 |
GPM @ 40 PSI | 35 |
GPM @ 50 PSI | 28 |
GPM @ 60 PSI | 19 |
Height | 8 15/16" |
Housing Material | Cast iron |
HP | 1.5 |
Hz | 50/60 |
Impeller Material | Low Lead Brass |
Impeller Type | Closed |
Inlet | 1-1/2 FNPT |
Length | 19" |
Max. Case Pressure | 160 PSI |
Max. Fluid Viscosity | Clear Water |
Max. Inlet Pressure | 31 PSI |
Max. Liquid Temp. | 200 Degrees |
Max. Pressure | 69 PSI |
Max. Working Pressure | 69 PSI |
Min. Inlet Flow Required | 2 GPM |
Motor Ambient Temp. Rating | 65 Degrees C/149 Degrees F |
Motor Enclosure | ODP |
Motor RPM | 3450/2875 |
Motor Type | ODP |
NEMA/IEC Frame | NEMA 56J |
Outlet | 1-1/4 FNPT |
Phase | 3 |
Plug or Connector Type | Direct Wire |
Seal Application | Water |
Seal Material | Stainless Steel, Buna N and Carbon/Silicon Carbide |
Seal Type | Mechanical |
Service Factor | 1.3 |
Shaft Material | Stainless Steel |
Stages | 2 |
Suction Lift | 25 Ft. |
Voltage | 208-230/460 |
Wetted Materials | Brass,CI,416 SS,Buna N,Carbon,Silicon Carbide,BR |
Width | 7" |