| Item | Fuel Transfer Pump |
| Bearing Type | Adjustable |
| Bung Adapter Connection Type | MNPT |
| Bung Adapter Material | Cast Iron |
| Bung Connection Dia. | 2" |
| Bypass Valve | Yes |
| Diesel Exhaust Fluid Compatible | No |
| Discharge Connection Type | NPT |
| Discharge Hose Size | No Hose |
| Duty Cycle | 30 min. On/30 min. Off |
| Explosion Proof | Yes |
| Food Grade | No |
| For Container Size | 275 gal. |
| Full Load Amps | 26A |
| Height Above Container | 8 3/8" |
| Housing Material | Cast Iron |
| Hp | 1/4 hp |
| Includes | Installation Components |
| Includes Bung Adapter | Yes |
| Includes Suction Tube | No |
| Max. Flow Rate | 15 GPM |
| Max. Head | 37 ft. |
| Max. Head Pressure | 16 psi |
| Max. Media Temp. | 150°F |
| Max. Outlet Pressure | 16 psi |
| Max. Viscosity | 4 cST |
| Media Type | Biodiesel, Diesel, Ethanol, Gasoline, Kerosene, Mineral Spirits |
| Metered | No |
| Min. Media Temp. | -40°F |
| Motor Enclosure Design | Explosion Proof |
| Motor Speed | 2600 RPM |
| Motor Type | Permanent Magnet |
| Mount Type | Bung |
| Nozzle Type | Not Included |
| Outlet Size | 3/4" |
| Overall Height | 9" |
| Overall Length | 12 1/4" |
| Overall Width | 9" |
| Power Cord Length | 18 ft. |
| Power Source | Electric |
| Pump Connection Type | NPT |
| Pump Design | Rotary Vane |
| Pump Kit Type | Pump Only |
| Pump Mount Size | 2" |
| Rated Voltage | 12V DC |
| Runs Dry | Yes |
| Seal Material | Buna N |
| Seal Type | Mechanical |
| Self Priming | Yes |
| Suction Tube Outside Dia. | 1" |
| Thermal Protection | Yes |
| Variable Speed | No |
| Wetted Material | Buna N, Ceramic, Cork, Stainless Steel, Steel, Thermoset Plastic, Viton |
| Agency Compliance | cULus |
| Bung Connection Diameter | 2" |
| For Media Type | Biodiesel, Diesel, Ethanol, Gasoline, Kerosene, Mineral Spirits |
| Full Load Current (a) | 26A |
| Maximum Fluid Temperature | 150°F |
| Maximum Head | 37 ft. |
| Maximum Head Pressure | 16 psi |
| Maximum Outlet Pressure | 16 psi |
| Maximum Viscosity | 4 cSt |
| Meter | Not Included |
| Minimum Fluid Temperature | -40°F |
| Motor Enclosure | Explosion Proof |
| Motor Hp | 1/4 hp |
| Motor Speed (rpm) | 2600 RPM |
| Self-priming | Yes |
| Suction Tube Od | 1" |
| Wetted Materials | Buna-N, Ceramic, Cork, Stainless Steel, Steel, Thermoset, Viton |
