Item | Multi-Stage Booster Pump |
Amps | 4.4-3.9/2.0 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 35 @ 105 Ft. |
Best Efficiency GPM @ PSI | 35 @ 45 |
Best Efficiency Range GPM @ Head | 42-18 @ 75-150 Ft. |
Duty | Continuous |
Frame | 56J |
GPM @ 10 PSI | 52 |
GPM @ 20 PSI | 48 |
GPM @ 40 PSI | 38 |
GPM @ 60 PSI | 23 |
GPM @ 80 PSI | 1.9 |
Height | 6 5/16" |
Housing Material | Cast iron |
HP | 1.5 |
Hz | 60 |
Impeller Material | Stainless Steel |
Impeller Type | Closed |
Inlet | 1-1/4" FNPT |
Inlet/Outlet | 1-1/4 x 1" FNPT |
Length | 18.5" |
Max. Case Pressure | 150 PSI |
Max. Dia. Solids | 5/64" |
Max. Fluid Viscosity | 100 SSU |
Max. Liquid Temp. | 194 F |
Max. Pressure | 81 PSI |
Motor Ambient Temp. Rating | 40 Degrees C |
Motor Enclosure | ODP |
Motor RPM | 3450 |
Motor Type | 3 Phase |
NEMA/IEC Frame | 56J |
Outlet | 1" FNPT |
Phase | 3 |
Seal Application | Long life When not Run Dry or Pumping Abrasives |
Seal Material | Carbon/Ceramic, Buna N, Stainless Steel |
Seal Type | Mechanical |
Service Factor | 1.3 |
Shaft Material | Stainless Steel |
Stages | 4 |
Suction Lift | 5 ft. with a Foot Valve |
Type | Horizontal Multi-Stage |
Voltage | 208-230/460 |
Wetted Materials | Cast Iron, Carbon/Ceramic, Buna N, Stainless Steel |
Width | 6.5" |