Multi-Stage Booster Pumps And Systems
Multi Stage Booster Pump
Style | Model | Housing Material | Amps | Best Efficiency GPM @ Head | HP | Impeller Material | Inlet | Length | Max. Case Pressure | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 45HB13012 | €8,122.72 | |||||||||
B | 70HB13012 | €7,565.62 | |||||||||
A | 5GBC05 | €1,949.93 | |||||||||
A | 33GBC20 | €3,727.92 | |||||||||
A | 25GBC2012K0 | €2,958.94 | |||||||||
A | 5GBC07 | €2,355.75 | |||||||||
A | 25GBC30 | €4,266.11 | |||||||||
A | 10GBC10 | €2,145.64 | |||||||||
A | 10GBC1012K0 | €2,624.45 | |||||||||
A | 25GBC3012P0 | €3,787.81 | |||||||||
A | 25GBC20 | €3,381.25 | |||||||||
A | 5GBC03 | €1,931.45 | |||||||||
A | 10GBC15 | €2,547.35 | |||||||||
A | 7GBC07 | €2,118.45 | |||||||||
A | 7GBC0712N0 | €2,552.67 | |||||||||
A | 5GBC0512J0 | €2,215.29 | |||||||||
A | 33GBC201J0 | €3,245.90 | |||||||||
A | 33GBC30 | €4,523.26 | |||||||||
A | 33GBC3012N0 | €3,762.77 | |||||||||
A | 5GBC0712P0 | €2,475.35 | |||||||||
A | 10GBC1512Q0 | €2,832.18 | |||||||||
A | 18GBC2012N0 | €2,958.94 | |||||||||
A | 18GBC20 | €3,381.25 | |||||||||
A | 10GBC1514Q0 | €3,261.63 | |||||||||
A | 25GBS2012K4 | €3,615.87 |
Multi Stage Booster Pumps And Systems
Dayton booster pumps are designed for transferring liquids, such as hot or cold clean water and low-density non-explosive liquids. These booster pumps are powered by a 3-phase, TEFC multi-stage motor and have a stainless-steel enclosed impeller for pumping out liquid at a desired speed. They feature a cast iron housing and have EPDM, silicon carbide & stainless-steel seals for reliable operation. The ball bearings in the shaft ensure a smooth operation. Choose from a wide range of these booster pumps, available in 56C and 56J frame enclosures on Raptor Supplies.
Dayton booster pumps are designed for transferring liquids, such as hot or cold clean water and low-density non-explosive liquids. These booster pumps are powered by a 3-phase, TEFC multi-stage motor and have a stainless-steel enclosed impeller for pumping out liquid at a desired speed. They feature a cast iron housing and have EPDM, silicon carbide & stainless-steel seals for reliable operation. The ball bearings in the shaft ensure a smooth operation. Choose from a wide range of these booster pumps, available in 56C and 56J frame enclosures on Raptor Supplies.
Style | Model | Housing Material | Amps | Best Efficiency GPM @ Head | HP | Inlet | Length | Max. Case Pressure | Max. Liquid Temp. | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 5UWJ2 | €1,773.12 | |||||||||
B | 5UXF7 | €1,159.90 | |||||||||
C | 5UXF3 | €796.44 | |||||||||
D | 5UWK0 | €2,600.36 | |||||||||
E | 5UWJ9 | €1,991.63 | |||||||||
F | 5UWJ7 | €1,580.57 | |||||||||
G | 5UWH9 | €1,570.75 | |||||||||
H | 5UXF8 | €1,305.22 | |||||||||
B | 5UXF4 | €819.47 | |||||||||
I | 5UXG4 | €1,563.94 | |||||||||
J | 5UXG3 | €1,342.39 | |||||||||
K | 5UXG2 | €1,001.60 | |||||||||
L | 5UXG1 | €783.97 | |||||||||
M | 5UWJ3 | €2,320.15 | |||||||||
J | 5UXG0 | €882.25 | |||||||||
N | 5UXF5 | €1,511.54 | |||||||||
C | 5UXF6 | €935.62 | |||||||||
O | 5UWJ5 | €2,098.16 | |||||||||
P | 5UWJ8 | €1,820.66 | |||||||||
Q | 5UXF9 | €1,763.20 | |||||||||
R | 5UWH6 | €1,382.04 | |||||||||
R | 5UWH8 | €1,344.04 | |||||||||
S | 5UWK9 | €2,811.48 | |||||||||
T | 5UWL2 | €2,833.70 | |||||||||
U | 5UWL6 | €3,124.46 |
Style | Model | Hz | Amps | Best Efficiency GPM @ Head | Inlet | Length | Max. Pressure | Motor Type | Outlet | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | PB1014S103 | €1,703.65 | |||||||||
A | PB1016S153 | €1,880.14 | |||||||||
A | PB3506A203 | €1,643.07 | |||||||||
A | PB0712A073 | €1,225.82 | |||||||||
A | PB0712S073 | €1,741.86 | |||||||||
A | PB1016A153 | €1,372.74 | |||||||||
A | PB2711S203 | €2,191.43 | |||||||||
A | PB0516A073 | €1,392.86 | |||||||||
A | PB2711A203 | €1,640.49 | |||||||||
A | PB1014A103 | €1,298.63 | |||||||||
A | PB3508A301 | €1,724.39 | |||||||||
A | PB2714A303 | €1,805.65 | |||||||||
A | PB2714A301 | €1,692.09 | |||||||||
A | PB2714S301 | €2,285.36 | |||||||||
A | PB0512A051 | €1,024.34 | |||||||||
A | PB0712A071 | €1,337.06 | |||||||||
A | PB2711S201 | €2,043.65 | |||||||||
A | PB1014S101 | €1,975.22 | |||||||||
A | PB3508A303 | €1,670.54 | |||||||||
A | PB0512S051 | €1,798.69 | |||||||||
A | PB2711A201 | €1,697.33 | |||||||||
A | PB1016A151 | €1,323.59 | |||||||||
A | PB1014A101 | €1,225.72 | |||||||||
A | PB0516A071 | €1,229.16 | |||||||||
A | PB0508A031 | €1,006.64 |
Multi-Stage Booster Pumps
Franklin multi-stage booster pumps are designed to meet pressure boosting needs in water supply applications. These stainless steel pumps feature an induction or capacitor start motor capable of withstanding flow rates up to 268 PSI and a carbon-ceramic / Buna / Viton seal for leak-proof operation. They are horizontally mounted for high performance with a maximum power of 3 HP & suction lift up to 15 feet. These multi-stage booster pumps are available in 2 to 15 stage options on Raptor Supplies.
Franklin multi-stage booster pumps are designed to meet pressure boosting needs in water supply applications. These stainless steel pumps feature an induction or capacitor start motor capable of withstanding flow rates up to 268 PSI and a carbon-ceramic / Buna / Viton seal for leak-proof operation. They are horizontally mounted for high performance with a maximum power of 3 HP & suction lift up to 15 feet. These multi-stage booster pumps are available in 2 to 15 stage options on Raptor Supplies.
Style | Model | Impeller Material | Amps | Frame | Inlet | Length | Max. Case Pressure | Max. Liquid Temp. | Max. Pressure | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 30FMH1S3-T | €2,625.00 | |||||||||
A | 30FMH2S5 | €3,097.47 | |||||||||
A | 15FMH05S2-T | €2,054.82 | |||||||||
A | 15FMH07S3 | €2,097.64 | |||||||||
A | 15FMH05S2 | €1,876.32 | |||||||||
A | 45FMH2S3 | €3,453.61 | |||||||||
A | 30FMH2S5-T | €2,983.81 | |||||||||
A | 30FMH07S2 | €2,275.00 | |||||||||
A | 15FMH15S5 | €2,625.00 | |||||||||
A | 15FMH15S5-T | €2,581.25 | |||||||||
A | 30FMH07S2-T | €2,275.00 | |||||||||
A | 30FMH15S4 | €2,762.62 | |||||||||
A | 15FMH2S6 | €2,931.25 | |||||||||
A | 30FMH15S4-T | €2,668.75 | |||||||||
A | 30FMH1S3 | €2,417.52 | |||||||||
A | 15FMH1S4-T | €2,362.50 | |||||||||
A | 45FMH15S2 | €3,150.00 | |||||||||
A | 15FMH2S6-T | €2,712.50 | |||||||||
A | 45FMH15S2-T | €3,150.00 | |||||||||
A | 45FMH2S3-T | €3,363.87 | |||||||||
A | 15FMH07S3-T | €2,362.50 | |||||||||
A | 15FMH1S4 | €2,292.81 | |||||||||
B | 10FBT07C4 | €2,187.50 | |||||||||
B | 7FBT1S4 | €3,368.75 | |||||||||
B | 5FBT1C4 | €2,380.78 |
OPV Series Multistage Pumps
Hydro Vacuum OPV Series multistage pumps are used for pumping and improving pressure of drinking water in office buildings and hydrophore plants. They are attached to clamp couplings for comfortable tear down of motor without removing the pump. These pumps feature cartridges type face seals to seal the shaft in main body and have drives regulated by frequency inverters for efficient opeartion. Choose from a range of these multistage pumps, available in 8, 10, 11, 15 and 16 stage variants.
Hydro Vacuum OPV Series multistage pumps are used for pumping and improving pressure of drinking water in office buildings and hydrophore plants. They are attached to clamp couplings for comfortable tear down of motor without removing the pump. These pumps feature cartridges type face seals to seal the shaft in main body and have drives regulated by frequency inverters for efficient opeartion. Choose from a range of these multistage pumps, available in 8, 10, 11, 15 and 16 stage variants.
Style | Model | Number of Stages | Price | |
---|---|---|---|---|
A | OPV 4.01.1.2110.5 | €1,319.64 | RFQ | |
A | OPV 6.01.1.2110.5 | €2,002.45 | RFQ | |
A | OPV 5.01.1.2110.5 | €1,547.07 | RFQ | |
A | OPV 3.02.1.2110.5 | €1,269.70 | RFQ | |
A | OPV 4.02.1.2110.5 | €1,503.56 | RFQ | |
A | OPV 6.02.1.2110.5 | €2,419.75 | RFQ | |
A | OPV 5.02.1.2110.5 | €1,741.40 | RFQ | |
A | OPV 5.03.1.2110.5 | €1,990.59 | RFQ | |
A | OPV 3.03.1.2110.5 | €1,345.36 | RFQ | |
A | OPV 6.03.1.2110.5 | €2,724.31 | RFQ | |
A | OPV 4.03.1.2110.5 | €1,731.98 | RFQ | |
A | OPV 5.04.1.2110.5 | €2,215.06 | RFQ | |
A | OPV 2.04.1.1110.5 | €1,125.83 | RFQ | |
A | OPV 4.04.1.2110.5 | €1,783.42 | RFQ | |
A | OPV 3.04.1.2110.5 | €1,450.16 | RFQ | |
A | OPV 6.04.1.2110.5 | €3,141.62 | RFQ | |
A | OPV 2.05.1.1110.5 | €1,186.16 | RFQ | |
A | OPV 3.05.1.2110.5 | €1,570.32 | RFQ | |
A | OPV 4.05.1.2110.5 | €1,834.83 | RFQ | |
A | OPV 6.05.1.2110.5 | €3,243.97 | RFQ | |
A | OPV 5.05.1.2110.5 | €2,281.33 | RFQ | |
A | OPV 3.06.1.2110.5 | €1,616.29 | RFQ | |
A | OPV 5.06.1.2110.5 | €2,565.13 | RFQ | |
A | OPV 6.06.1.2110.5 | €3,899.59 | RFQ | |
A | OPV 4.06.1.2110.5 | €2,069.21 | RFQ |
Multi-Stage Booster Pumps
Style | Model | Price | |
---|---|---|---|
A | 45MW85 | €1,032.69 | |
B | 45MW66 | €819.47 | |
C | 45MW84 | €966.14 | |
D | 45MW86 | €1,011.11 | |
D | 45MW90 | €1,098.20 | |
A | 45MW89 | €1,256.02 | |
E | 45MW75 | €1,018.46 | |
B | 45MW80 | €1,353.67 | |
B | 45MW78 | €2,136.13 | |
A | 45MW93 | €1,383.44 | |
B | 45MW74 | €1,028.21 | |
B | 45MW68 | €916.91 | |
D | 45MW92 | €1,455.65 | |
E | 45MW82 | €1,296.26 | |
D | 45MW88 | €1,066.39 | |
B | 45MW67 | €1,375.15 | |
B | 45MW83 | €1,353.67 | |
E | 45MW73 | €896.50 | |
A | 45MW87 | €1,076.07 | |
E | 45MW79 | €1,436.91 | |
D | 45MW94 | €1,432.25 | |
E | 45MW69 | €818.59 | |
B | 45MW72 | €974.83 | |
E | 45MW81 | €1,444.51 | |
A | 45MW91 | €1,353.67 |
208 to 240 VAC Open Dripproof Multi-Stage Booster Pump, 15 Inlet Size
Model | Item | Price (ex. VAT) | |
---|---|---|---|
10GBC1517Q0 | CD2HNK | €4,045.62 |
Multi-Stage Booster Pumps And Systems
Multi-stage booster pumps are designed for pumping underground water in pressure boosting, reverse osmosis and water circulation applications. Raptor Supplies offers a wide range of these multistage pumps from brands like Dayton, Franklin, Flint & Walling and Goulds Water Technology. Franklin multi-stage booster pumps feature stainless-steel construction to meet the pressure boosting requirements and ball type bearing for supporting both axial and radial loads, while reducing the frictional losses. The brand's MH Series pumps are powered by UL-listed, industry-proven indoor / outdoor flange motors with output power ratings ranging between 1 and 3 HP. Flint & Walling pressure booster pumps are made of powder-coated stainless steel and cast iron for delivering the additional strength to handle increased pressure (maximum 211 PSI) from mains and private water systems. These pumps feature an enclosed Noryl impeller where vanes are sandwiched between the two shrouds providing axial and radial thrusts for more flexibility. They are available in 1 and 3/4 In FNPT inlet / outlet sizes on Raptor Supplies.
Explore More
- Gas Welding Equipment
- Pressure and Temperature Control Valves
- Hammers and Striking Tools
- Power Shears
- Manuals
- Air Hacksaws
- Safety Banners and Posters
- Air Brake Accessories
- Lab Adapters and Joints
- Filter Replacement Parts, Accessories and Service Kits
- WHEATON Autosampler Vials
- CLEVELAND Cobalt End Mill
- ACROVYN End Cap, Almond, Acrovyn
- AIR SYSTEMS INTERNATIONAL Test Kits
- WRIGHT TOOL 3/4 Inch Drive Impact Hex Bit Sockets
- KERICK VALVE Float Valve and Float with Fixed Arms
- ZURN PEX Tools
- SLOAN Flange Kits
- GLOBE SCIENTIFIC Flasks
- SUPCO Capillary Tubes