Item | Multi-Stage Booster Pump |
Amps | 20/10 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 31 @ 140 Ft. |
Best Efficiency GPM @ PSI | 31 @ 140 |
Best Efficiency Range GPM @ Head | 39-18 @ 100-180 Ft. |
Duty | Continuous |
Frame | 56J |
GPM @ 10 PSI | 53 |
GPM @ 20 PSI | 49 |
GPM @ 40 PSI | 41 |
GPM @ 60 PSI | 31 |
GPM @ 80 PSI | 17 |
Height | 6 5/16" |
Housing Material | Cast iron |
HP | 2 |
Hz | 60 |
Impeller Material | Stainless Steel |
Impeller Type | Closed |
Inlet | 1-1/4" FNPT |
Inlet/Outlet | 1-1/4 x 1" FNPT |
Length | 21 5/16" |
Max. Case Pressure | 150 PSI |
Max. Dia. Solids | 5/64" |
Max. Fluid Viscosity | 100 SSU |
Max. Liquid Temp. | 194 F |
Max. Pressure | 100 psi |
Motor Ambient Temp. Rating | 40 Degrees C |
Motor Enclosure | ODP |
Motor RPM | 3450 |
Motor Type | Capacitor-Start |
NEMA/IEC Frame | 56J |
Outlet | 1" FNPT |
Phase | 1 |
Seal Application | Long life When not Run Dry or Pumping Abrasives |
Seal Material | Carbon/Ceramic, Buna N, Stainless Steel |
Seal Type | Mechanical |
Service Factor | 1.15 |
Shaft Material | Stainless Steel |
Stages | 5 |
Suction Lift | 5 ft. with a Foot Valve |
Type | Horizontal Multi-Stage |
Voltage | 115/230 |
Wetted Materials | Cast Iron, Carbon/Ceramic, Buna N, Stainless Steel |
Width | 6.5" |