Item | Centrifugal Pump |
Agency Compliance | CUS |
Amps | 4.8/2.4 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 48 @ 40 Ft. |
Best Efficiency Range GPM @ Head | 66 @ 20 to 21 @ 50 Ft. |
Drain Plug | No |
Duty | Continuous |
GPM of Water @ 10 Ft. of Head | 84 |
GPM of Water @ 15 Ft. of Head | 79 |
GPM of Water @ 20 Ft. of Head | 77 |
GPM of Water @ 25 Ft. of Head | 70 |
GPM of Water @ 30 Ft. of Head | 57 |
GPM of Water @ 40 Ft. of Head | 48 |
GPM of Water @ 5 Ft. of Head | 90 |
GPM of Water @ 50 Ft. of Head | 24 |
GPM of Water @ 60 Ft. of Head | 8 |
Height | 7.875" |
Housing Material | 304 Stainless Steel |
HP | 1 |
Hz | 60 |
Impeller Material | 304 SS |
Impeller Type | Closed |
Inlet | 1-1/2" NPT |
Inlet Pressure | 121 PSI |
Inlet Type | 1-1/2" NPT |
Length | 14.25" |
Max. Case Pressure | 150 PSI |
Max. Dia. Solids | 1/8" |
Max. Fluid Viscosity | 31 SSU |
Max. GPM @ Head | 90 @ 5 Ft. |
Max. Head | 65 ft. |
Max. Liquid Temp. | 200 F |
Max. Specific Gravity | 1.0 |
Min. GPM @ Head | 8 @ 60 Ft. |
Motor Enclosure | ODP |
Motor RPM | 3450 |
Motor Type | 3-Phase |
NEMA/IEC Frame | 56J |
Outlet | 1-1/4 NPT |
Phase | 3 |
Port Rotation | 90 Increments |
Screw Material | Stainless Steel |
Seal Material | Viton |
Seal Type | Mechanical |
Service Factor | 1.15 |
Shaft Material | Stainless Steel |
Type | Chemical Resistant |
Voltage | 230/460 |
Wetted Materials | Carbon, Ceramic, 304 Stainless Steel, Viton |
Width | 6 9/16" |