Get it by Tuesday, Jun 17
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
Payment
| Item | Drill Bit |
| Application | General Purpose Drilling |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 1.0469 |
| Depth X Dia. Ratio | 4xd |
| Drill Bit Dimension Type | Fractional Inch |
| Drill Bit Finish | Black Oxide |
| Drill Bit Point Angle | 118° |
| Drill Bit Point Type | Conventional Point |
| Drill Bit Size | 1.047" |
| Finish | Black Oxide |
| Flute Length | 6 5/8" |
| Flute Type | Spiral |
| Helix Angle | +21° to +34° |
| Material | High Speed Steel |
| Max. Drilling Depth | 6 5/8" |
| Number Of Flutes | 2 |
| Overall Length | 11 1/4" |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application Iso Code | K, P |
| Shank Type | Taper |
| Spiral Direction | Right Hand |
| System Of Measurement | Fractional Inch |
| Taper Shank Size | MT3 |
| Depth:dia. Ratio | 4xD |
| Drill Diameter Tolerance | 0"/-0.0015" |
| Finish - Machining | Black Oxide |
| Material - Machining | High Speed Steel |
| Maximum Drilling Depth | 6 5/8" |
| Measurement System | Fractional Inch |
| Shank Type - Machining | Taper |
| Standards | ASME B94.11M |
| Ship weight (kg) | 0.81 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
