OSG Carbide Drill Micrograin
Filter
A
B
C| Style | Model | Flute Type | Flute Length | Overall Length | Grade | Drill Point | Drill Diameter Tolerance | Size | Coolant Fed | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 3318540 | Slow Spiral | 1.37" | 74 mm | Micro Grain | 120° | - | - | Non-Coolant Through | €150.83 | |
| B | HP243-2130 | Spiral | 1.1" | 66 mm | Micro Grain | 140° | +0.004 mm to +0.016 mm | 5.41 mm | Non-Coolant Through | €60.82 | |
| C | HP245-2189 | Spiral | 1.73" | 82 mm | Micro Grain | 140° | +0.004 mm to +0.016 mm | 5.56 mm | Non-Coolant Through | €68.46 | |
| B | HP243-3126 | Spiral | 1.61" | 79 mm | Micro Grain | 140° | +0.006 mm to +0.021 mm | 7.94 mm | Non-Coolant Through | €80.36 | |
| B | HP243-3780 | Spiral | 1.85" | 89 mm | Micro Grain | 140° | +0.006 mm to +0.021 mm | - | Non-Coolant Through | €113.45 | |
| C | HP245-3748 | Spiral | 2 2/5" | 103 mm | Micro Grain | 140° | +0.006 mm to +0.021 mm | 9.52 mm | Non-Coolant Through | €133.94 | |
| B | HP243-3228 | Spiral | 1.85" | 89 mm | Micro Grain | 140° | +0.006 mm to +0.021 mm | - | Non-Coolant Through | €91.15 |
We are here to help!
Looking for a part not listed here?
Explore More
- DIGILOCK
- FINISH 1ST
- JABSCO
- KEYSHAFT
- LABELMASTER
- Chains
- Ratcheting Wrench Sets
- Replacement Sensors
- Conduit
- Wall Cabinets
- Reciprocating Air Saws - SPEEDAIRE
- Welding Gloves, Wing Thumb, Standard, Cowhide, Gray - CONDOR
- Coated Gloves, ANSI Cut Level A2, Palm Dipped, Kevlar - CONDOR
- Knit Gloves, Full Finger, Palm Dotted, 7 Gauge, White/Black - CONDOR
- TRITAN SAP Series Pillow Block Bearings
- NoGo Standard Thread Plug Gages, 3/4-16 Unf Lh - VERMONT GAGE
- NG Series Molded Case Switches, NG Frame - EATON
- Socket Wrenches - AMPCO METAL
- Double Adjusting Tighteners - BROWNING
- SPEC Metric Compression Springs, Stainless Steel, 18.5 mm Outside Dia.