FEDERAL SIGNAL Headlight Flasher
Federal Signal headlight flashers are solid-state flashers connected with positive-side switched headlight systems on police vehicles.
Filter
Features
- Federal Signal headlight flashers feature high beam deactivation and low voltage / reverse polarity protection.
- They have seven user-selectable flashing options.
- These flasher units come with universal mounting brackets for easy installation on various vehicles.
Frequently Asked Questions
What are the advantages of nighttime shut-off?
During the nighttime, it gets difficult to see upcoming vehicles from a distance. If a driver uses a flasher in such conditions, it will reduce the oncoming drivers' visibility and might lead to accidents. This headlight flasher unit comes with an automatic nighttime shut-off to avoid mishappenings.
How to install these flashers?
- Use the flasher as a template to mark the centre of the two mounting holes.
- Drill two holes and use the supplied mounting hardware to mount the flasher.
- Connect the green wire from the flasher to a reliable ground (preferably close to the ground post of the battery).
- Locate the power supply wire (on either the passenger-side or driver-side high-beam headlight) and cut approximately 10 to 12 inches from the headlight.
- Connect the yellow wire to the cut wire that returns to the headlight.
- Connect the blue wire to the other piece of the cut wire that provides power to the opposite high-beam headlight.
- Connect the white wire through the supplied fuse and fuse holder to a power source capable of providing 15
How to switch the flashing pattern?
- Touch the red / black wire to the ground.
- The flasher will display the next flash pattern in the pre-determined sequence.
- Remove the wire from the ground when the flasher shows the desired flash pattern to avoid being hit by the subsequent flash pattern.
- Fold and seal the red / black wire after selecting the desired pattern.
We are here to help!
Looking for a part not listed here?
Explore More
- Dust Pans
- Shaft Adapters
- Plastic Fan Blades
- Food Service Dispensers
- Bonding and Grounding Wire
- Utility Carts
- Power Transmission Belts
- Engine Driven Pumps
- Rotary Swivel and Expansion Joints
- Pavement Quality
- PENTEK Carbon Filter Cartridge
- PHILLOCRAFT Work Table
- MERIT Sanding Belt, 2"x48", Aluminium Oxide
- OSG Cobalt, Thread Forming, Bright Tap Finish
- TRIM LOK INC Black Edge Guard
- DIXON Bleed Needle Valves
- EATON Meter Sockets
- CELLTREAT Syringe Filters
- HUMBOLDT Gilson Testing Screens, Hydraulic Clamping