EATON Danfoss MRV3-10 Series Directional Control Valves
Eaton Danfoss MRV3-10 Series directional control valves are ideal for controlling the fluid flow in harvesters, refuse haulers and other industrial applications. These 4-way 2 / 3-position style, screw-in cartridge valves offer easy mounting / installation.
Filter
Working Mechanism
- These valves direct the fluid flow between valve ports 1 & 3 and block valve port 2 in one position.
- Users need to turn the operator 90 degrees to direct the flow between valve ports 1 & 2 and block port 3.
- During cross-over transitions, all these ports get blocked.
Features
- Eaton Danfoss MRV3-10 Series directional control valves have steel construction with hardened & ground-working components.
- These manual semi-rotary valves can control the flow of general-purpose hydraulic fluids complying with standards like MIL-H-5606, SAE 10 & SAE 20.
- These direct-acting MRV3-10 Series directional control valves have Buna-N seals to prevent leakage.
- The allowable stem torque applicable in the valve cavity is 47 to 54 Nm.
- These Vickers Eaton MRV3-10 Series directional control valves have a pressure rating of 210 bar (3000 psi).
Compatible Accessories
- Eaton 889599 Seal Kit: This seal repair kit having Viton seal is used to replace the worn-out or damaged seal and provide chemical resistance in these flow control valves.
- Eaton 565804 Seal Kit: This seal repair kit having a Buna-N seal is used to replace worn-out or damaged Buna-N seals in these flow control valves.
Frequently Asked Questions
What is the operating temperature of these Eaton Danfoss MRV3-10 Series directional control valves?
These Eaton Danfoss MRV3-10 Series directional control valves can operate at temperatures ranging from -40 to 120 degrees C.
What is the flow rate of these Eaton Danfoss MRV3-10 Series directional control valves?
They have 3 ports with a maximum flow rate of 23 l/min (6 gpm).
How to prevent contaminants in these Eaton Danfoss MRV3-10 Series directional control valves?
Users are recommended to install filtration equipment complying with ISO cleaning code 18/16/13 before the valves to prevent contaminants from entering them.
We are here to help!
Looking for a part not listed here?
Explore More
- Mail Carts
- Power Supply Cord
- Shoe Cover and Hairnet Dispensers
- Pipe Insulation Wrap
- Ultrasonic Leak Detectors
- Material Lifts
- Fire Protection
- Automotive Interior
- Temperature Controls
- Chain and Tools
- NUPLA NuPole(R) System
- SANFORD Cartridge Label
- HALLOWELL 304 Stainless Steel, Box Locker
- VERMONT GAGE Go/NoGo Standard Thread Gages, 5/8-11 Unc
- MARTIN SPROCKET 882 Series Stock Bore Type Conveyor Sprockets, Semi Steel
- MAGLINER Actuators
- DAYTON Jaw Plate, Grooveds
- BALDOR / DODGE DLMAH, Four-Bolt Flange, Ball Bearings
- GROVE GEAR NH Series, BM-L Style, 852 Size, Ironman Narrow Housing Worm Gear Reducers
- BROWNING VF4S 200 Series Intermediate Duty Four Bolt Flange Mounted Ball Bearings