EATON Danfoss L2 Series Gear Pumps
Eaton Danfoss L2 Series gear pumps act like positive displacement (PD) pumps to transfer fluids mechanically using their interlocking cogs & gears and the cyclic pumping action. The smooth pulse-free flow is proportional to the gear's rotational speed. These gear pumps are suitable for use in a...gricultural, material handling, natural resources & civil engineering applications.Read more
Filter
Style | Model | Price | |
---|---|---|---|
A | 25501-RSA | €799.22 | RFQ
|
B | 25506-RSA | €1,026.96 | RFQ
|
C | 25583-RBF | €2,454.33 | RFQ
|
D | 25508-RSC | €1,026.96 | RFQ
|
E | 25507-LSA | €1,026.96 | RFQ
|
B | 25506-RSB | €1,031.94 | RFQ
|
D | 25504-RSA | €997.14 | RFQ
|
F | 25508-RSB | €1,026.96 | RFQ
|
A | 25508-RSA | €1,026.96 | RFQ
|
C | 25508-LSG | €1,038.56 | RFQ
|
E | 25508-LSC | €1,026.96 | RFQ
|
A | 25508-LSB | €1,026.96 | RFQ
|
E | 25508-LSA | €1,026.96 | RFQ
|
E | 25506-RSC | €855.81 | RFQ
|
E | 25506-LSB | €1,026.96 | RFQ
|
C | 25502-LSA | €817.15 | RFQ
|
A | 25506-LSA | €1,031.94 | RFQ
|
D | 25505-RSC | €1,010.39 | RFQ
|
E | 25505-RSA | €842.00 | RFQ
|
E | 25505-LSG | €1,021.99 | RFQ
|
B | 25505-LSC | €1,010.39 | RFQ
|
C | 25505-LSB | €1,010.39 | RFQ
|
E | 25505-LSA | €842.00 | RFQ
|
F | 25504-RSC | €997.14 | RFQ
|
B | 25504-LSC | €997.14 | RFQ
|
F | 25504-LSB | €997.14 | RFQ
|
B | 25503-RSC | €822.68 | RFQ
|
D | 25502-RSB | €985.55 | RFQ
|
A | 25502-LSB | €980.57 | RFQ
|
A | 25588-RAP | €2,496.46 | RFQ
|
Working Mechanism
- Eaton Danfoss L2 Series gear pumps use their rotating cogs & gears to create a liquid seal with the pump's casing.
- This generates suction at a pump's inlet.
- Fluid gets drawn into the pump while being enclosed in the cavities generated by the rotating gears.
- This leads to fluid transfer to the discharge port.
Features
- Eaton Danfoss L2 Series gear pumps are compact and feature fewer moving parts.
- They are ideal for pumping high-viscosity fluids & oils.
- These gear pumps have aluminium housing with clockwise (CW) / counterclockwise (CCW) shaft rotation.
- They have plain backplate or double pump configuration.
- These gear pumps have a maximum continuous pressure of 248 bar (3600 PSI) & a maximum intermittent pressure of 276 bar (4000 PSI).
- They have a maximum continuous inlet temperature of 107 degrees C (225 degrees C) and a minimum operating temperature of -29 degrees C (-20 degrees F). High temperatures can cause thermal expansion of the casing & gears for reduced clearances inside a pump, resulting in increased wear or pump failure.
Frequently Asked Questions
What are the things to inspect these Eaton Danfoss L2 Series gear pumps?
- All parts should be clean & dry.
- Any part should not have any nicks or burrs.
- Check for any wear on the shafts & the seal.
- Check for broken, twisted or chipped gear teeth.
What is the displacement of these Eaton Danfoss L2 Series gear pumps?
These Eaton Danfoss L2 Series gear pumps have displacement ranging from 1.3 to 3.37 cubic inches (21.31 to 55.23 ml).
What tools may be required for disassembling & assembling these Eaton Danfoss L2 Series gear pumps?
These Eaton Danfoss L2 Series gear pumps can be easily disassembled & assembled using a socket, wrench, hammer, lubricant and driving tool.
We are here to help!
Looking for a part not listed here?
Explore More
- Single Phase Transformers
- Wire Mesh Slings
- Light Pole Base Covers
- Roof Hatch Railing Systems
- Power Pedestal Accessories
- Fan Blades and Propellers
- Mowers and Trimmers
- Key Control Identification
- Access Barriers and Crowd Control
- Indexable Tools
- APPROVED VENDOR 90 Degree Angle Stock
- BLACK DIAMOND Snap-Up Containment Berm
- DAYTON Hinge Kits, 46 Inch Length, Galvanised Steel Construction
- WESTWARD Rivet Hammr
- DAYTON Seal Plates, Steel Body, Painted Finish
- RUBBERMAID Liner
- WRIGHT TOOL 1/2 Inch Drive 6 Point Deep Metric Impact Sockets
- VESTIL TAL Series Tote-A-Loads
- BROWNING NCG Series Stock Steel Change Gears, 12 Pitch