EATON Danfoss FAR1-16 Series Flow Control Valves
Eaton Danfoss FAR-16 Series flow control valves are used in refuse haulers, water treatment plants, harvesters, oil & gas pipelines and chemical processing industries to measure the differential pressure and regulate the fluid flow.
Filter
Style | Model | Price | |
---|---|---|---|
A | 02-183443 | €546.82 | RFQ
|
B | 305AA00215A | €889.90 | RFQ
|
C | 02-199172 | €567.69 | RFQ
|
A | 02-181991 | €498.86 | RFQ
|
Working Mechanism
- The fluid in these valves flows directly between port 1 & 2 and port 3 & 4 in one position.
- The flow then gets directed between ports 1 & 4 and ports 3 to 2 by turning the operator at 90 degrees.
- Ports 2 & 4 get blocked while ports 1 & 3 get connected during the cross-over transition.
Features
- These screw-in cartridge valves comply with the ISO cleanliness code 18/16/13 microns to remove contamination.
- They are equipped with Buna-N seals to resist water and oil.
- These flow control valves are pressure compensated for free reverse flow.
- They have an aluminium housing to resist UV rays and extreme temperatures.
Compatible Accessories
- Eaton 889632 Spare Part Seal Kit: This seal kit features Buna-N seals for replacing damaged or worn-out seals in these directional control valves.
Frequently Asked Questions
What is the temperature rating of these flow control valves?
-40 to 120 degrees C.
Which fluids are compatible with these flow control valves?
General-purpose fluids complying with MIL-H-5606, SAE 10 and SAE 20 standards are compatible with Eaton Danfoss FAR1-16 Series flow control valves.
What is the flow rate range of these flow control valves?
30.3 to 113.6 l/min.
We are here to help!
Looking for a part not listed here?
Explore More
- Needle Scalers
- Sign Posts
- Gas Detector Battery Chargers
- Steering and Turning Bars
- Panel Disconnect Switches
- Cooling Fans and Accessories
- Gas Detection
- Automotive Cleaning/Appearance
- Conduit Wire and Pipe Storage
- Fencing and Fencing Hardware
- DAYTON Convertible Hand Truck
- CHICAGO PNEUMATIC 1/2" Air Impact Wrench
- NUPLA Hammer Tip 2 Inch Diameter
- GTO Swing Gate Operator
- RULAND MANUFACTURING Six Beam Flexible Couplings, Set Screw Style
- BUSSMANN ACL Series Automotive Fuses
- Cementex USA Metric Flush Connect Insulated Sockets, 12 Points, 3/8 Inch Square Drive
- TSUBAKI Split Taper Weld-On Hubs
- TSUBAKI QD Bushings, Type F
- BROWNING SSPS 100 Series Light Duty Stamped Steel Pillow Block Mounted Ball Bearings