EATON Breaker Rejection Bracket Kits
Eaton breaker rejection bracket kits are used with Magnum insulated-case power circuit breakers to prevent the insertion of a draw-out circuit breaker into an incompatible cassette.
Filter
Style | Model | Price | |
---|---|---|---|
A | 2A11893G01 | €289.78 | RFQ
|
B | 2A11893G92 | €289.78 | RFQ
|
Features
- Eaton 2A11893G92 features a narrow frame suitable for use in compact areas or panelboards with limited area.
- This brand's 2A11893G01 comes with a universal frame that can fit various circuit breakers.
Standards and Approvals
- UL
Frequently Asked Questions
How to install Eaton breaker rejection bracket kits?
- Figure out the location and number of washers, hex bolts and stop nuts to be used.
- Place bolts & lock washers in the correct rejection bracket holes and attach stop nuts from the other side.
- Attach the rejection bracket that has been put together to the breaker's bottom.
- Remove the one M6 x 40 mm bolt that is visible and use it to attach the rejection bracket to the rear housing with a helical washer (discard flat washer if so equipped).
- To attach the opposite side of the bracket to the front housing, use the two included M6 x 20 mm hex bolts and M6 helical washers.
We are here to help!
Looking for a part not listed here?
Explore More
- Timer Accessories
- Fire Extinguisher Alarms
- Demolition Hammer Accessories
- Process Heater Element Accessories
- Flame Resistant Aprons
- Benders
- Wire Connectors
- Air Treatment
- Glues and Cements
- Concrete Testing
- HONEYWELL Rotary Actuator Limit Switch Head
- HALDEX BARNES Birotational Hydraulic Gear Pump/Motor
- FLUORAMICS Tufoil Industrial Oil
- DAYTON Coated / Uncoated Cables, 3/32 Inch
- ENPAC Curb Style Inlet Guard 500 Gpm Black
- APPROVED VENDOR Nipple Hose 1 1/4 inch
- LIFT PRODUCTS LPT-035-60 Series, Scissor Lift Table
- PLAST-O-MATIC MBV Series 2 Way Sanitary Ball Valves
- EATON 2082 Series Straight Adapters
- TSUBAKI Split Taper Bushings, Type R2