EATON 900598 Series O-Ring Boss Plugs
Eaton 900598 Series O-ring boss plugs are used in the food & beverage processing, chemical processing, marine / military and pulp & paper industries to provide a leak-tight seal in hydraulic systems.
Filter
Adapter Type: Plug , Fitting Material: Steel , Thread Type: Male ORB
Style | Model | Finish | Length | Max. Working Pressure | Price | |
---|---|---|---|---|---|---|
A | 900598-20S | Trivalent Chromate Zinc | 1.2" | 2500 | €31.53 | |
A | 900598-32S | Trivalent Chromate Zinc | 1.43 | 2000 | €114.83 | |
A | 900598-5S | Trivalent Chromate Zinc | 0.67" | 5000 | €6.13 | |
A | 900598-24S | Trivalent Chromate Zinc | 1.27 | 2500 | €42.01 | |
A | 900598-6S | Trivalent Chromium Zinc | 0.73" | 7500 PSI | €5.57 | |
A | 900598-4S | Trivalent Chromium Zinc | 0.67" | 7500 PSI | €5.12 | |
A | 900598-8S | Trivalent Chromium Zinc | 0.8" | 7500 PSI | €6.16 | |
A | 900598-10S | Trivalent Chromium Zinc | 0.93" | 7500 PSI | €8.24 | |
A | 900598-12S | Trivalent Chromium Zinc | 1.09" | 5000 psi | €11.35 | |
A | 900598-16S | Trivalent Chromium Zinc | 1.12" | 4500 PSI | €16.63 |
Features
- They have carbon steel construction for structural rigidity and prolonged service life.
- These O-ring boss plugs feature trivalent chromate zinc finish to resist corrosion on exposed surfaces.
- They can be operated at temperatures up to 250 degrees F.
- These O-ring boss plugs come with a straight-angle shape for enhanced performance during operations.
- They have an SAE ORB end for a tight seal and leakproof operations.
Standards and Approvals
- SAE
Frequently Asked Questions
What is the difference between straight thread and tapered thread O-ring boss plugs?
- Straight thread O-ring boss plugs have a straight thread that goes all the way to the bottom of the boss, whereas tapered-thread plug units have a tapered thread that stops the bottom of the boss.
- Straight thread plugs are typically stronger and more durable, but tapered thread plugs are easier to install and less prone to damage during installation.
How to maintain these O-ring boss plugs?
Regular inspection of the fittings and O-rings should be done to ensure their proper functioning and to prevent leaks.
How do I install these Eaton O-ring boss plugs?
- Ensure that the O-ring is properly seated in the groove on the plug.
- Then, thread the plug into the system until it is hand-tight.
- Fianlly tighten it with a wrench or socket to the specified torque.
We are here to help!
Looking for a part not listed here?
Explore More
- Needle Scalers
- Label Dispenser Accessories
- Wash Bottles
- Shaft Arbors
- Dock Barricades
- Pneumatics Hoses
- Chain and Chain Accessories
- Tool Storage and Transfer Tanks
- Lab Filtration
- O-Rings and O-Ring Kits
- WHEELER-REX Glass Tube Cutter
- APPROVED VENDOR F Adapter, Male Adapter x MNPT, Aluminium
- BALDOR MOTOR Close Coupled Pump Motors, Three Phase, Footless, ODP
- EATON Safety Switch Crimp Lug Pad Kits
- TB WOODS Mechanical Clutches
- VESTIL DRUM-55 Series Portable Drum Jacks
- VESTIL SAW Series Shock Absorbing Wheels
- BALDOR / DODGE High Speed Taper Lock Flange Assemblies
- WEG HMI Cable Kits