Onboard Raptor as a vendor
Email

EATON 80 Series Photoelectric Sensor Switch Bodies


Eaton 80 Series photoelectric sensor switch bodies are used to sense the presence or absence of an object in dusty, dirty, wet, smoky and steamy application environments. They are used in electrical assemblies, panels and EOEMs.

Filter
EATON 8880C-6501A
EATON 8880C-6502B
StyleModelMPNPrice
A
8880C-6501		8880C-6501€1,914.93
B
8880C-6502		8880C-6502€1,933.88
B
8880C-7501		8880C-7501-
RFQ

Working Mechanism

  • A light-sensitive device detects the presence / absence of an object.
  • The sensor has an LED light source to send a beam of light towards the object being detected.
  • The sensor then sends a signal to the switch body after the object interrupts the light beam.
  • The circuit then activates or deactivates depending on the specific configuration of the switch.
  • The sensor's sensitivity is adjusted using the built-in sensitivity control on the switch body.
  • LED indicators on the switch body provide visual feedback about the status of the sensor and the circuit.

Features

  • These sensor switch bodies offer Noryl enclosure for low moisture absorption and enhanced hydrolysis resistance.
  • They come with 9 sensor heads, 3 logic modules and 7 control base units to customise the sensor according to application.
  • These photoelectric sensors are equipped with LED indicators for easy visual feedback about the sensor's performance.
  • They feature adjustable sensitivity settings for enhanced performance.

Standards and Approvals

  • UL

Frequently Asked Questions

What mounting options do these switch bodies allow?

Eaton 80 Series switch bodies allow panel, wall or ceiling mounting for easy and secure installation.

What is the operating temperature of these sensor switch bodies?

-4 to 121 degrees F.

How to install Eaton 80 Series photoelectric sensor switch bodies?

  • Determine the appropriate mounting location for the switch body.
  • Install the mounting bracket by using the exact mounting hardware.
  • Connect the sensor head with the help of the supplied connector cable.
    • Wire the switch body to the electrical circuit as per the wiring diagram mentioned in the installation manual.
  • Regulate the sensitivity of the sensor with the help of the built-in sensitivity control on the switch body.
  • Test the switch whether it is functioning properly or not.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More