DORIAN Turning Toolholders
Dorian turning toolholders are used in metalworking to hold cutting tools in place during a turning operation. These toolholders are attached to a lathe or turning machine and provide a secure, rigid mount for the cutting tool.
Filter
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y| Style | Model | Overall Length | Cutting Direction | Type | Shank Height | Shank Width | Rake | Rake Angle | Style | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | SCLCR06-2J | 3 1/2" | Right Hand | CCMT Holder | 3/8" | 3/8" | Neutral | 0° | SCLCR06-2J | €65.62 | |
| B | STNCR08-2J | 3 1/2" | Right Hand | TCMT Holder | 1/2" | 1/2" | Neutral | 0° | STNCR08-2J | €52.59 | |
| C | SDJCR06-2J | 3 1/2" | Right Hand | DCMT Holder | 3/8" | 3/8" | Neutral | 0° | SDJCR06-2J | €80.30 | |
| C | SDJCL06-2J | 3 1/2" | Left Hand | DCMT Holder | 3/8" | 3/8" | Neutral | 0° | SDJCL06-2J | €80.30 | |
| A | SCLCL06-2J | 3 1/2" | Left Hand | CCMT Holder | 3/8" | 3/8" | Neutral | 0° | SCLCL06-2J | €65.62 | |
| D | CTAPL08-2J | 3 1/2" | Left Hand | TPG Holder | 1/2" | 1/2" | Neutral | 0° | CTAPL08-2J | €60.82 | |
| E | CTAPR08-2J | 3 1/2" | Right Hand | TPG Holder | 1/2" | 1/2" | Neutral | 0° | CTAPR08-2J | €60.82 | |
| F | MCLNL12-4B | 4 1/2" | Left Hand | CNMG Holder | 3/4" | 3/4" | Negative | 7° | MCLNL12-4B | €77.15 | |
| G | MRGNL12-4B | 4 1/2" | Left Hand | Rnmg Holder | 3/4" | 3/4" | Negative | 7° | MRGNL12-4B | €77.15 | |
| F | MCLNR12-4B | 4 1/2" | Right Hand | CNMG Holder | 3/4" | 3/4" | Negative | 7° | MCLNR12-4B | €77.15 | |
| H | MCKNR12-4B | 4 1/2" | Right Hand | CNMG Holder | 3/4" | 3/4" | Negative | 7° | MCKNR12-4B | €92.58 | |
| D | MTJNR10-3B | 4 1/2" | Right Hand | Tnmg Holder | 0.675" | 0.675" | Negative | 7° | MTJNR10-3B | €71.20 | |
| D | MTFNL12-3B | 4 1/2" | Left Hand | Tnmg Holder | 3/4" | 3/4" | Negative | 7° | MTFNL12-3B | €77.15 | |
| D | CTAPL12-3B | 4 1/2" | Left Hand | TPG Holder | 3/4" | 3/4" | Neutral | 0° | CTAPL12-3B | €77.15 | |
| I | MDJNR12-4B | 4 1/2" | Right Hand | DNMG Holder | 3/4" | 3/4" | Negative | 7° | MDJNR12-4B | €119.60 | |
| G | MRGNR12-4B | 4 1/2" | Right Hand | Rnmg Holder | 3/4" | 3/4" | Negative | 7° | MRGNR12-4B | €77.15 | |
| A | SCLCR10-3B | 4 1/2" | Right Hand | CCMT Holder | 0.675" | 0.675" | Neutral | 0° | SCLCR10-3B | €70.23 | |
| J | ADVJNR-12-3B | 4 1/2" | Right Hand | VNMG Holder | 3/4" | 3/4" | Negative | 13° | ADVJNR-12-3B | €189.05 | |
| C | SDJCR12-3B | 4 1/2" | Right Hand | DCMT Holder | 3/4" | 3/4" | Neutral | 0° | SDJCR12-3B | €104.16 | |
| I | MDJNL12-4B | 4 1/2" | Left Hand | DNMG Holder | 3/4" | 3/4" | Negative | 7° | MDJNL12-4B | €119.60 | |
| K | MTGNR10-3B | 4 1/2" | Right Hand | Tnmg Holder | 0.675" | 0.675" | Negative | 7° | MTGNR10-3B | €67.79 | |
| L | MWLNL12-3B | 4 1/2" | Left Hand | WNMG Holder | 3/4" | 3/4" | Negative | 7° | MWLNL12-3B | €80.67 | |
| D | MTENN12-4B | 4 1/2" | Neutral | Tnmg Holder | 3/4" | 3/4" | Negative | 10° | MTENN12-4B | €77.15 | |
| M | MSRNR12-4B | 4 1/2" | Right Hand | SNMG Holder | 3/4" | 3/4" | Negative | 7° | MSRNR12-4B | €77.15 | |
| F | MCLNL10-4B | 4 1/2" | Left Hand | CNMG Holder | 0.675" | 0.675" | Negative | 7° | MCLNL10-4B | €71.20 | |
| D | MTANL10-3B | 4 1/2" | Left Hand | Tnmg Holder | 0.675" | 0.675" | Negative | 7° | MTANL10-3B | €69.33 | |
| N | MDPNN12-4B | 4 1/2" | Neutral | DNMG Holder | 3/4" | 3/4" | Negative | 9° | MDPNN12-4B | €119.60 | |
| O | MTJNL12-3B | 4 1/2" | Left Hand | Tnmg Holder | 3/4" | 3/4" | Negative | 7° | MTJNL12-3B | €77.15 | |
| M | MSDNN10-3B | 4 1/2" | Neutral | SNMG Holder | 0.675" | 0.675" | Negative | 7° | MSDNN10-3B | €69.33 | |
| D | MTANL12-3B | 4 1/2" | Left Hand | Tnmg Holder | 3/4" | 3/4" | Negative | 7° | MTANL12-3B | €77.15 | |
| M | MSKNR12-4B | 4 1/2" | Right Hand | SNMG Holder | 3/4" | 3/4" | Negative | 7° | MSKNR12-4B | €77.15 | |
| M | MSDNN12-4B | 4 1/2" | Neutral | SNMG Holder | 3/4" | 3/4" | Negative | 7° | MSDNN12-4B | €77.15 | |
| P | ADWLNL-12-4B | 4 1/2" | Left Hand | WNMG Holder | 3/4" | 3/4" | Negative | 7° | ADWLNL-12-4B | €163.86 | |
| Q | MTGNL10-3B | 4 1/2" | Left Hand | Tnmg Holder | 0.675" | 0.675" | Negative | 7° | MTGNL10-3B | €67.79 | |
| C | SDJCL12-3B | 4 1/2" | Left Hand | DCMT Holder | 3/4" | 3/4" | Neutral | 0° | SDJCL12-3B | €104.16 | |
| A | SCLCL10-3B | 4 1/2" | Left Hand | CCMT Holder | 0.675" | 0.675" | Neutral | 0° | SCLCL10-3B | €70.23 | |
| R | MTGNL12-3B | 4 1/2" | Left Hand | Tnmg Holder | 3/4" | 3/4" | Negative | 7° | MTGNL12-3B | €77.15 | |
| S | MVVNN12-3B | 4 1/2" | Neutral | VNMG Holder | 3/4" | 3/4" | Negative | 9° | MVVNN12-3B | €126.17 | |
| F | MCLNR10-4B | 4 1/2" | Right Hand | CNMG Holder | 0.675" | 0.675" | Negative | 7° | MCLNR10-4B | €71.20 | |
| A | SCLCL12-3B | 4 1/2" | Left Hand | CCMT Holder | 3/4" | 3/4" | Neutral | 0° | SCLCL12-3B | €79.87 | |
| T | SVJBL12-3B | 4 1/2" | Left Hand | VBGT Holder | 3/4" | 3/4" | Neutral | 0° | SVJBL12-3B | €117.62 | |
| K | MTGNR12-3B | 4 1/2" | Right Hand | Tnmg Holder | 3/4" | 3/4" | Negative | 7° | MTGNR12-3B | €77.15 | |
| J | ADVJNL-12-3B | 4 1/2" | Left Hand | VNMG Holder | 3/4" | 3/4" | Negative | 13° | ADVJNL-12-3B | €189.05 | |
| D | MTANR12-3B | 4 1/2" | Right Hand | Tnmg Holder | 3/4" | 3/4" | Negative | 7° | MTANR12-3B | €77.15 | |
| B | STNCR12-3B | 4 1/2" | Right Hand | TCMT Holder | 3/4" | 3/4" | Neutral | 0° | STNCR12-3B | €60.82 | |
| A | SCLCR12-3B | 4 1/2" | Right Hand | CCMT Holder | 3/4" | 3/4" | Neutral | 0° | SCLCR12-3B | €79.87 | |
| T | SVJBR12-3B | 4 1/2" | Right Hand | VBGT Holder | 3/4" | 3/4" | Neutral | 0° | SVJBR12-3B | €117.62 | |
| M | MSDNN12-3B | 4 1/2" | Neutral | SNMG Holder | 3/4" | 3/4" | Negative | 7° | MSDNN12-3B | €77.15 | |
| D | MTANR10-3B | 4 1/2" | Right Hand | Tnmg Holder | 0.675" | 0.675" | Negative | 7° | MTANR10-3B | €69.33 | |
| U | MTFNR12-3B | 4 1/2" | Right Hand | Tnmg Holder | 3/4" | 3/4" | Negative | 7° | MTFNR12-3B | €77.15 | |
| V | MVJNL12-3B | 4 1/2" | Left Hand | VNMG Holder | 3/4" | 3/4" | Negative | 13° | MVJNL12-3B | €126.17 | |
| T | CTGPR10-3B | 4 1/2" | Right Hand | TPG Holder | 0.675" | 0.675" | Neutral | 0° | CTGPR10-3B | €67.79 | |
| T | CTGPL12-3B | 4 1/2" | Left Hand | TPG Holder | 3/4" | 3/4" | Neutral | 0° | CTGPL12-3B | €77.15 | |
| L | MWLNL12-4B | 4 1/2" | Left Hand | WNMG Holder | 3/4" | 3/4" | Negative | 7° | MWLNL12-4B | €80.67 | |
| M | MSDNN08-3B | 4 1/2" | Neutral | SNMG Holder | 1/2" | 1/2" | Negative | 7° | MSDNN08-3B | €63.85 | |
| W | MTJNR12-3B | 4 1/2" | Right Hand | Tnmg Holder | 3/4" | 3/4" | Negative | 7° | MTJNR12-3B | €77.15 | |
| L | MWLNR12-3B | 4 1/2" | Right Hand | WNMG Holder | 3/4" | 3/4" | Negative | 7° | MWLNR12-3B | €80.67 | |
| X | CTAPR12-3B | 4 1/2" | Right Hand | TPG Holder | 3/4" | 3/4" | Neutral | 0° | CTAPR12-3B | €77.15 | |
| L | MWLNR12-4B | 4 1/2" | Right Hand | WNMG Holder | 3/4" | 3/4" | Negative | 7° | MWLNR12-4B | €80.67 | |
| V | MVJNR12-3B | 4 1/2" | Right Hand | VNMG Holder | 3/4" | 3/4" | Negative | 13° | MVJNR12-3B | €126.17 | |
| Y | ADDJNR-12-4B | 4 1/2" | Right Hand | DNMG Holder | 3/4" | 3/4" | Negative | 7° | ADDJNR-12-4B | €189.05 |
Working Mechanism
- The turning toolholder is mounted to the lathe or machine tool using a base.
- The cutting tool is inserted into the tool post of the turning toolholder.
- The clamping mechanism is used to secure the cutting tool within the tool post.
- The adjustment mechanism is used to position the cutting tool relative to the workpiece. This allows for precise control over the cutting process.
- The rotation mechanism allows the cutting tool to be rotated around its own axis. This creates the desired cutting geometry.
Features
- Dorian turning toolholders feature shank mounting for a rigid connection and precise alignment.
- They have multiple cutting edges & can be rotated to provide a fresh cutting edge.
- These turning toolholders have a cutting head that holds an indexable insert for improved tool life.
- They are capable of cutting in either right / left hand directions for controlled chip flow and improved accuracy.
Frequently Asked Questions
How are turning toolholders mounted to a lathe or machine tool?
Turning toolholders are mounted to a lathe or machine tool using a base. The base is secured to the machine tool using bolts or clamps, providing a stable platform for the toolholder.
What are the factors to consider while choosing the right turning toolholder for my application?
Major factors to consider while chosing a turning toolholder include the type of cutting tool being used, the material being machined and the desired cutting parameters.
What benefits does Dor-Lock mounting style offer to these turning toolholders?
Dor-Lock clamping system offers secure holding of the workpiece and precise control of the cutting operation.
We are here to help!
Looking for a part not listed here?
Explore More
- DYNALON
- KEYSHAFT
- WEILER
- PRECISION
- PETERSEN PRODUCTS
- Food Service Accessories
- Cooling Filter Dryers
- Portable Power Sources
- Laboratory Trays and Pans
- Pneumatic Actuated Valves
- 316 Stainless Steel Inline Ball Valve, Press x Press - VIEGA PROPRESS
- 8007 Series Pneumatic Toggle Clamps - DESTACO
- Nova 2000 Helmets - ALLEGRO SAFETY
- 95030, 95040, 95050, 95060 Series Straight Line Action Clamp - DESTACO
- MAYHEW TOOLS Handguarded Cold Chisels
- Number Kit - BRADY
- CPVC Y-Check Valves, Socket Ends, EPDM - SPEARS VALVES
- Bevel Mate Version 3 Bevel Router Head - BEVEL TOOL
- WRP Reaction Paddles - ENERPAC
- GLOBE SCIENTIFIC Certified Pipette Tips, 1-300 ul