DAYTON Solenoid Valves without Coils, Brass, 300 psi Pressure
Filter
Body Material: Brass , Coefficient of Volume: 0.22 , Gasket Material: Buna N , Max. Fluid Temp.: 180 Degrees F , Min. Operating Pressure Differential: 0 psi , Operation Type: Direct Acting , Orifice Dia.: 3/32" , Valve Configuration: Normally Closed , Valve Design: 2-Way
Style | Model | Air Flow | Flow Range | Overall Height | Overall Length | Pipe Size | Price | |
---|---|---|---|---|---|---|---|---|
A | 2CZZ8 | Up to 12.5 scfm | 0.16 to 2.2 gpm | 2.875" | 1.5" | 1/4" | €144.32 | |
A | 1A574 | Up to 34.0 scfm | 2.2 to 3.8 gpm | 2.75" | 1.187" | 1/8" | €76.11 |
Solenoid Valves without Coils, Brass, 300 psi Pressure
Dayton coil-less solenoid valves are used for automatic control of air, water, inert gas & light oil in water treatment systems, humidifiers, vending machines and welding equipment. These valves feature brass construction and provide a maximum flow rate of 34 scfm. They come integrated with Buna N gaskets for resistance against oils, gasoline & petroleum based fluids, and can withstand fluid temperatures up to 180 degrees F. Choose from a wide range of these solenoid valves, available in lengths of 1.187 and 1.5 inches.
We are here to help!
Looking for a part not listed here?
Explore More
- Surface Protection Films
- Expansion Joints
- Acoustic Booths
- Cryogenic Supplies
- Breathable Air Tubing
- Measuring and Layout Tools
- Bolts
- Aeration
- Gas Detection
- Flooring
- APPROVED VENDOR Buffing Wheel
- MASTER LOCK Plastic Lockout Padlock, Keyed Alike
- PARKER 3251 Series, Flow Control Check Valves
- 3M Sanding Belt, 18 Inch X 1/2 Inch
- KINGSWAY GROUP Aluminium Pull Handle with Satin Finish
- ZURN Cast Iron Square Drain Strainer
- VERMONT GAGE NoGo Standard Thread Gages, 1 5/16-12 Un
- LEESON Pressure Washer Pump Motors, Single Phase, TEFC, C Face With Base
- WATTS Double Check Valve Assemblies
- LYNDEX-NIKKEN Torque Control Tapping Collets