DAYTON Suspended Horizontal Hydronic Wall & Ceiling Unit Heaters
Filter
Hz: 60 , Max. Operating PSI: 75 , Motor Enclosure: Totally Enclosed , Phase: 1 , Voltage: 115
Style | Model | Air Flow | Amps | Depth | Height | Motor HP | Width | Price | |
---|---|---|---|---|---|---|---|---|---|
A | 5YH18 | 245 cfm | 0.8 | 3.75" | 16" | 16W | 18" | €965.96 | |
A | 5PV19 | 500 cfm | 0.8 | 7.75" | 16" | 16W | 18" | €1,043.63 | |
A | 5PV22 | 580 cfm | 1.2 | 8.75" | 16" | 25W | 18" | €1,204.64 | |
A | 5PV26 | 850 cfm | 1.4 | 10.5" | 18.5" | 1/20 | 20.5" | €1,386.01 |
Suspended Horizontal Hydronic Wall & Ceiling Unit Heaters
Dayton suspended horizontal hydronic heaters provide primary or supplementary heating by pushing and spreading the heated air. They are suspended from a wall or ceiling to spread the air evenly. These units store water which is then heated by passing a current through serpentine coils and circulated with a maximum rate of 150 PSI. They feature a totally enclosed motor which is capable of producing a maximum power output of 25W. They are ETL & ETLc listed and comply with OSHA standards for safe use. Choose from a wide range of these heaters, available in 245, 500, 580 and 850 CFM airflow ratings on Raptor Supplies.
We are here to help!
Looking for a part not listed here?
Explore More
- Transformer Cooling Fans
- Carbide End Mills
- Absorbent Rolls
- O-Rings
- Rubber Hoses
- Lubricators
- Fiberglass
- Spacers and Standoffs
- Specialty Paints Coatings and Additives
- Tin
- PEERLESS Well Wheel Pulley Block
- EXTECH Surface Temperature Probe
- E JAMES & CO Roll Neoprene
- TEMPIL Temperature Indicator
- VULCAN HART Lever Switch
- LOVEJOY FA Type Flex Sleeves
- LINN GEAR Type A Sprockets, 160 Chain
- MASTER LOCK S33 Thermoplastic Padlocks Keyed Alike Master Keyed
- SMC VALVES Cu Series Compact Cylinder