DAYTON Draft Booster Motors
Filter
Bearings: Ball , Body Dia.: 3.3" , Duty: Continuous Air Over , Enclosure: Open Air-Over , Frame: Non-Standard , Insulation Class: B , Max. Ambient Temp.: 40 Degrees C , Motor Enclosure Design: Open Air-Over , Motor Thermal Protection: Auto , NEMA/IEC Frame: Nonstandard , Phase: 1 , Service Factor: 1.0 , Thermal Protection: Auto
Style | Model | Rotation | Full Load Amps | HP | RPM Range | Shaft Dia. | Shaft Length | Voltage | Hz | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 1D093 | CCW | 1.3/0.65 | 1/30 | 1801-3000 | 1/4" | 3.75" | 115/230 | 60 | €193.87 | |
B | 1D094 | CCW | 2.2/1.1 | 1/15 | 1801-3000 | 1/4" | 3.75" | 115/230 | 60 | €199.85 | |
A | 3M895 | CW | 1.7 | 1/25 | 3001-3600 | 5/16" | 1 5/16" | 115 | 60 | €181.06 | |
B | 1D091 | CW | 1.1/1.1 | 1/15 | 1801-3000 | 1/4" | 3.75" | 208-230 | 60 | €208.39 | |
B | 1D092 | CW | 2.2/1.1 | 1/15 | 1801-3000 | 1/4" | 3.75" | 115/230 | 60 | €194.95 | |
C | 1D089 | CW/CCW | 0.6 | 1/9 | 1801-3000 | 1/4" | 3.75" | 230 | 50/60 | €310.59 |
Draft Booster Motors
Dayton draft booster motors are used to power draft inducer fans inside a gas furnace and replace damaged draft booster motors in gas furnace heating systems. They feature an open air-over enclosure for cooling heated parts of the motor and are integrated with ball bearings for low rotational friction. These motors deliver speeds up to 3200 rpm and are available in 1/30, 1/25, 1/15 & 1/9 hp variants.
We are here to help!
Looking for a part not listed here?
Explore More
- Oil Filter Wrenches
- Wire Terminal Blocks
- Chartless Digital Recorder Accessories
- PIR Motion Sensors
- Rod and Piston Seal Kits
- Shut-Off Valves
- Inspection and Retrieving Tools
- Books and Books Supplies
- Pneumatic System Components
- Scales and Scale Accessories
- SHARKBITE Male Reducing Adapter
- LIQUATITE Liquid-Tight Flexible Non Metallic Conduit
- AIR HANDLER Air Filter Pad Holding Frames
- STANLEY Combination Wrench
- VERMONT GAGE Go/NoGo Standard Thread Plug Gages, 5-44 Unf Lh
- VERMONT GAGE Go/NoGo Standard Thread Gages, 1 1/2-6 Unc
- EATON Handle Yokes
- SANDUSKY LEE Shelving Units
- MORSE CUTTING TOOLS Straight Flute Taps, 2094M Straight Flute Tap Series