info@raptorsupplies.com

DAYTON Blower 10 5/8 Inch, Galvanized Steel


Filter
DAYTON 7HR85A
Assembled/Unassembled: Unassembled , Bearing Type: Ball , Discharge Height (In.): 11.375 , Discharge Width (In.): 8.25 , Housing Finish: None , Housing Height: 17.5" , Housing Length: 16 5/16" , Housing Material: Galvanized Steel , Housing Width: 8.25" , Hz: 60 , Inlet Dia.: 10-7/8" , Max. Ambient Temp.: 104 F , Max. Blower RPM: 1350 , Max. Inlet Temp.: 150 Deg.F , Motor Enclosure: Open Dripproof , Mounting Position: Blower Shaft Horizontal , Shaft Dia.: 3/4" , Wheel Diameter: 11 1/8" , Wheel Material: Steel , Wheel Width: 6.437"
StyleModelRotationMotor HPBlower RPMCFM @ 0.250-In. SPCFM @ 0.500-In. SPCFM @ 0.750-In. SPCFM @ 1.000-In. SPFull Load AmpsPrice
A
7HR85		CCW Viewing Drive Side1/285013101040--2.1-2.2/1.1€1,459.22
A
7HR88		CCW Viewing Drive Side1.5135023202170202018304.4-4.0/2.0€1,642.08
A
7HR64		CCW Viewing Drive Side1/285013101040--7.6/3.7-3.8€1,121.54
A
7HR65		CCW Viewing Drive Side3/4105017201500125093011.6/5.9-5.8€1,257.48
A
7HR66		CCW Viewing Drive Side11175197018101610139013.0/6.6-6.5€1,258.32
A
7HR86		CCW Viewing Drive Side3/410501720150012509302.9-2.8/1.4€1,303.42
A
7HR87		CCW Viewing Drive Side1117519701810161013903.2-2.9/1.4€1,595.53
A
7HR16		CW Viewing Drive Side3/4105017201500125093011.6/5.9-5.8€1,269.00
A
7HR27		CW Viewing Drive Side1/285013101040--2.1-2.2/1.1€1,470.75
A
7HR28		CW Viewing Drive Side3/410501720150012509302.9-2.8/1.4€1,314.94
A
7HR29		CW Viewing Drive Side1117519701810161013903.5-3.6/1.8€1,433.04
A
7HR30		CW Viewing Drive Side1.5135023202170202018305.0-4.8/2.4€1,718.94
A
7HR17		CW Viewing Drive Side11175197018101610139013.0/6.6-6.5€1,269.84
A
7HR37		CW Viewing Drive Side1/285013101040--7.6/3.7-3.8€1,133.07

Blower 10 5/8 Inch, Galvanized Steel

Dayton single inlet forward curve blowers are designed for quiet and efficient performance in industrial air moving applications. These units are equipped with dynamically balanced forward-curved steel wheels for inducing high air volume with a minimum rotation speed. They feature die stamped steel housing for structural rigidity and long term performance. They are provided with single-or-three phase motors with open drip-proof enclosures for circulating cool air and preventing water droplets from falling in the motor and damaging the moving parts. Choose from a wide range of these blowers, available in blower speeds ranging from 850 to 1350 rpm.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More