COOPER B-LINE Tolco Series Fig 981 Fast Attach Universal Swivel Sway Brace Attachments


Cooper B-line TOLCO Series rigid bracing system attachments are used for secure and stable bracing of mechanical systems in commercial and industrial applications, including HVAC, plumbing, fire protection, and electrical conduit installations.

Filter

Features

  • These TOLCO Series FIG 981 bracing system attachments are made of steel construction for mechanical strength.
  • They feature electro-galvanised finish for resistance against harsh weather conditions.
  • These attachments can accommodate rods sizing 3/8 inches thru 5/8 inches and 3/4 inches thru 7/8 inches.
  • They have a maximum load rating of 2015 lb.
  • These units are designed to fit multiple sizes of bracing pipe, strut or structural steel.
  • They have breakaway bolt heads to assure verification of proper installation torque.
  • The stackable design makes it possible to install both lateral and longitudinal braces on a single hanger rod without having to disassemble the rod.

Standards and Approvals

  • UL
  • OSHPD
  • FM

Frequently Asked Questions

What is the installation procedure for Cooper B-line TOLCO 981 rigid bracing system attachments?

  • Loosen the spin nut on top of the hanger by turning it counterclockwise, raising it above the hanger.
  • Securely tighten the hex nut by spinning it clockwise.
  • Insert the brace pipe into the jaw of the 98 and tighten the cone point set screw until the head breaks off, ensuring proper installation torque.
  • Pivot the brace pipe to the desired angle.
  • Attach the brace pipe to the structure using a TOLCO swivel structural attachment.

What are the factors to consider while choosing the appropriate TOLCO Series rigid bracing system components?

Major factors include the type of mechanical system, load requirements, building codes and specific installation conditions.

We are here to help!

Looking for a part not listed here?