CHERNE Clean-Out Gripper Plugs
Cherne Clean-Out Gripper plugs are used to seal pipes having damaged threads. They have glass-reinforced ABS plastic construction with a natural rubber threaded O-ring and stainless steel nut for corrosion resistance & durability.
Filter
A| Style | Model | For Minimum Pipe Inside Diameter | For Maximum Pipe Inside Diameter | For Pipe Size | Nominal Size | Range | Height | Plug Length | Head Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 270168 | 2 1/5" | 2 1/2" | 2" | 2" | 2.2" to 2.5" | 1.9" | 1.9" | Hex Nut | €19.62 | |
| A | 270178 | 3.23" | 3 1/2" | 3" | 3" | 3.23" to 3.5" | 2 1/5" | 2 1/5" | Hex Nut | €18.99 | |
| A | 270138 | 3.78" | 4 1/4" | - | 3 1/2" | 3.78" to 4.25" | 2 1/5" | 2 1/5" | Hex Nut | €23.38 | |
| A | 270188 | 4.22" | 4 3/5" | 4" | 4" | 4.22" to 4.6" | 2 1/5" | 2 1/5" | Hex Nut | €26.22 |
Features
- Cherne Clean-Out Gripper plugs can handle a maximum head pressure of 40 feet & maximum back pressure of 17 PSI (1.2 bar).
- Their O-rings provide a positive airtight seal in operating temperatures ranging from 0 to 125 degrees F.
- These plugs are black in colour for blending with cast-iron pipe.
- They are NPT-sized with nominal sizes ranging from 2 to 4 inches.
Standards and Approvals
- ISO 9001
- OSHA
Frequently Asked Questions
How to install & remove these Clean-Out Gripper plugs?
- For installing these plugs, place them into the cleanout tee or the desired pipe by loosening the nut. Tighten the nut after installation.
- For removal of these plugs, loosen the nut and then remove from the pipe or cleanout tee.
What are the points to remember before installing these plugs?
- Select a plug having the proper size according to the pipe.
- Always measure the maximum back pressure that the plug must withstand. Choose the plug accordingly.
- Clean the pipe of any debris or foreign substance to reduce damage to the plug. Clean the plug with a mild soap & water without using any cleaning agent.
- Check the plug for any crack, corrosion, cut, leaks or loose fittings.
How to store these Cherne Clean-Out Gripper plugs?
These plugs must be stored in a dry place below 110 degrees F and away from sunlight & ozone or ultra-violet light sources.
We are here to help!
Looking for a part not listed here?
Explore More
- KEYSHAFT
- KINDORF
- BIG BEAM
- BIG ASS FANS
- SANISURE
- Fuel Transfer Pumps w/Nozzle
- Single Grit Sharpening Stones
- Gas Detection Accessories
- Air Powered Airless Paint Sprayers
- Surface Testers
- 30283 Akrobins Super Size Bins - AKRO-MILS
- Cowhide Leather Gray Palm Gloves - CONDOR
- 207 Series Vertical Hold Down Clamps, Flanged Base, U Bar - DESTACO
- XL-C 90 Degree Elbow, Press x FTG - VIEGA PROPRESS
- Small Keyseat Cutters, Shank Type, Solid Carbide - KEO
- Wrenches - DIXON
- D5 Series General-Purpose Relays - EATON
- Jet Set Throw Lines - ALL GEAR
- Antislip Stair Treads - HANDI TREADS
- Batteries - MEGGER