Out of stock
Sku
DZ7WCU
Parallel-Shaft Subfractional Gearmotors, 24V DC
| Starting Torque | 50 in.-lb. |
|---|---|
| Shaft Dia. | 5/16" |
| Motor Shaft Design | Flat |
| Type | DC Gearmotor |
| Shaft Type | Single |
| Mounting Position | All Angle |
| No Load Rpm | 1.5 |
| Shaft Length | 1" |
| Ship Pack Length (in) | 4 |
| Ship Pack Height (in) | 4.00 |
| Raptor Price | €0.00 |
| Upc | 00194484302412 |
| Price Source | Grainger |
| Model No | 52JE55 |
| Brand | DAYTON |
| Ship Pack Width (in) | 4.00 |
| Optimization Phase | opt_1 |
| Gear Ratio | 4672:1 |
| Max. Torque | 50.0 in.-lb. |
| Max. Ambient Temp. | 40 Degrees C |
| Lubrication | Grease Filled |
| Length Less Shaft | 3" |
| Input Hp | 1/230 |
| Housing Material | Die Cast Zinc |
| Gear Material | Die Cast Zinc |
| Gear Case | Die Cast Zinc |
| Full Load Amps | 0.16 |
| Brushes | Yes |
| Bearings | Sintered Bronze Sleeve |
| Motor Type | Permanent Magnet Dc |
| Enclosure | Totally Enclosed Nonventilated |
| Nameplate Rpm | 1.3 |
| Voltage | 24 VDC |
| Finish | Unpainted |
| Insulation Class | B |
| Gear Type | Spur |
| Overall Length | 4" |
| Item | DC Gearmotor |
| Thermal Protection | None |
| Shaft Orientation | Parallel |
| Rotation | CW/CCW |
| Reversible Shaft Output | Yes |
| Overhung Load | 30 lb. |