TEXAS PNEUMATIC TOOLS Parts

Texas Pneumatic Tools rock drills are used for mining and rock excavations. They are powered by compressed air and are attached to hardened steel scalers to break rocks. These rock drills feature a lever throttle for adjustable actuation speeds. Choose from a wide range of rock drills, available in 7/8 x 3-1/4, 7/8 x 4-1/4 and 1 x 4-1/4 inch chuck sizes on Raptor Supplies.

Texas Pneumatic Tools replacement air tool filters are used to remove contaminants from compressed air (post compression), which might cause damage to internal components. They have a hex-shaped design with outer threads for easy installation and are available in male & female thread variants.

Texas Pneumatic Tools corrosion-resistant, galvanised pipe nipples are ideal for connecting two male or female fittings and transfer water, air, oil, steam or natural gas in low-pressure plumbing applications. They are configured with thread connections to provide an excellent watertight seal when connecting piping to other fittings, equipment or valves and are available in thread sizes of 1-1/2, 1/2, 3/4 and 1 inches.

Texas Pneumatic Tools locks are ideal for securing the connection in pneumatic tools, such as chipping hammers, rock drills and riveting busters. They are designed to provide protection against heavy vibrational forces.

Texas Pneumatic Tools barrels are one of the main components of pneumatic tools, like chipping hammers, rock drills or needle scalers that help in performing chipping, cutting, riveting or piercing applications. These barrels are made of hardened-steel alloy for improved durability and longevity. They come equipped with needles or shank chisels for delivering high force blows to get the job done within seconds.

Texas Pneumatic Tools square head plugs attach at the ends of pipes, shafts, tubes or connectors and provide safety in high-pressure air, water and natural gas systems. These threaded square plugs are made of high-quality metal for a steady performance and high thermal resistance. They further feature a galvanised zinc plating for rust protection and a simple design that requires little maintenance. Raptor Supplies offers an array of these hydraulic plugs in 1/4, 3/4, 3/8 and 1 inch sizes.

Texas Pneumatic Tools rivet buster retainers are designed to fit a standard riveting hammer and rivet busters. These units feature high-grade steel construction that is further hardened to provide reliable performance & durability. They can withstand shocks and fit both threaded & grooved barrels.

Texas Pneumatic Tools oil felt pads are used in kitchen or cloth drawers, shoe bins, closets, cupboards and recycling bins for applications that require deodorising and freshening. They absorb oil easily and can be washed with water & soap, followed by air drying.

Texas Pneumatic Tools dowel pins are ideal for joining and keeping machine components aligned. These cylindrical pins are made of hardened steel to provide superior tensile strength and prevent shattering of pins under high stress. They feature a chamfered end for easy insertion into reamed holes. The brand's long pins allow damaged holes to open wider and accommodate new pins; can easily fasten onto softer materials or oblong holes.

Texas Pneumatic Tools bolts are used for holding objects / materials together, or positioning objects. These metal fasteners offer structural rigidity and corrosion resistance. They comprise a head at one end & a chamfer at the other end, and have a shaft with an external helical ridge.

Texas Pneumatic Tools roll pins are used to fasten one shafts or flat faces of mating parts together. These pins are considered self-retaining fasteners owing to the force exerted by them against the hole they are placed in.

Texas Pneumatic Tools chuck drivers are used for holding an object in radially symmetrical configuration, like a cylinder.

Texas Pneumatic Tools spring retainers attach chisel bits to the barrel of a compatible air-powered hammer. These units provide a friction fit to securely hold chisels on an air-powered hammer and feature metal coils that twist onto the hammer barrel. They hold the chisel bits in place to prevent them from flying off the tool during use.

Texas Pneumatic Tools exhaust air deflectors redirect the exhaust air in engines, motors, vents and other HVACs to protect objects & equipment. They have a single-piece housing with an opening to deflect exhaust air from the direction of its natural flow.

Texas Pneumatic Tools jumbo retainers are used for holding foam organs and gauze pads in place, within FLS trainers.

Texas Pneumatic Tools side rod kits are suitable replacements for worn out parts in paving breakers used for demolition applications. These kits include fronhead bolt springs, hex nuts, lock washers and bolts.

Texas Pneumatic Tools retainers provide a friction fit to hold chisels on an air-powered hammer. They feature a solid chuck design that securely grips bits into the barrel of an air-powered hammer while allowing tool-free bit changes. They thread onto the hammer barrel and have a spring-loaded collar that slides back to release the bits.

Texas Pneumatic Tools rivet buster bumpers prevent wear of retainer sleeves and are ideal for extending the life of jumbo shank tools.

Texas Pneumatic Tools snap handles are used as attachments for floating equipment used in concrete finishing projects. These snap handles feature an ergonomic grip that increases comfort and control. They come with a lever throttle for additional safety.

Texas Pneumatic Tools air inlet swivels allow regulator hoses to move smoothly and align with mask inlets without putting any stress on the hose couplings. They can also be used with second stage scuba regulators and prevent twisting, stretching, bending or kinking.

Texas Pneumatic Tools needle springs are suitable replacements for worn out springs in scaling hammers used for cleaning castings, welding slags and de rusting metals. They have one piece construction that offers durability and prevents the spring from loosing tension over time.

Texas Pneumatic Tools backhead assemblies feature adjustable ends to connect to the source of pressurised fluids. They have distilled ends with reciprocating bits to control to strike the workpieces while using maximum forces. These backheads are connected with hollow wear sleeves by threaded connections that extend the distal ends to form an exterior shank or surface of the machine. Choose from a wide range of these assemblies, also available in push & lever type backhead assembly variants.

Texas Pneumatic Tools replaceable foreheads are suitable for replacing worn or damaged foreheads in TX-C9 rock drill machine. These alloy steel forged units provide durability in tough environments and absorb shock, as well as vibrations to protect the operator from any potential injury. Selected models are cushioned with a bushing to reduce friction and prevent wear for extended service life. Choose from a wide range of these foreheads, available in forehead bare, forehead compete and forehead w/ bushing style variants.

Texas Pneumatic Tools hardware assemblies include nuts, screwed securely onto the associated bolts for quick access at the time of need. The alloy steel forged units provide durability and added strength to the units. These threaded bolts create a positive engagement with the nuts when a rotational force is applied to them and prevent loosening or misplacement of components during storage, transit or operation.

Texas Pneumatic Tools backhead bolts offer strong clamping force with the combination of nuts to create a strong bolted joint between the backhead and the driver chunk in tools like hammer drill. These units come with hexagonal heads that can be rotated from any angle for loosening or tightening in tight spaces with the help of a wrench. When mated with the compatible nuts, these bolts provide extra friction to resist unwinding due to external forces. Selected models come with nut and washer assembly for equally distributing the load of bolt and preventing self loosening due to vibrational effects.