Masonry Nails
Masonry nails are designed for fixing objects on walls, ceilings and other surfaces. They are suitable for medium-duty loads and are used with bricks / concrete blocks. These thick, fluted
...Read moreAPPROVED VENDOR -
Masonry Nail Fluted 3 Inch Length, 66PK
Model | Item | Price (ex. VAT) | |
---|---|---|---|
1131103 | AB6LWH | €10.62 |
APPROVED VENDOR -
Masonry Nail Fluted 3/4 Inch Length, 280PK
Model | Item | Price (ex. VAT) | |
---|---|---|---|
4NFA1 | AD8XDU | €10.62 |
APPROVED VENDOR -
Masonry Nail Fluted 1 Inch Length, 173PK
Model | Item | Price (ex. VAT) | |
---|---|---|---|
4NFA2 | AD8XDV | €10.62 |
APPROVED VENDOR -
Masonry Nail Fluted 1 1/4 L, 145PK
Model | Item | Price (ex. VAT) | |
---|---|---|---|
4NFA3 | AD8XDW | €10.62 |
APPROVED VENDOR -
Masonry Nail Fluted 1 1/2 L, 129PK
Model | Item | Price (ex. VAT) | |
---|---|---|---|
4NFA4 | AD8XDX | €10.62 |
APPROVED VENDOR -
Masonry Nail Fluted 2 Inch Length, 98PK
Model | Item | Price (ex. VAT) | |
---|---|---|---|
4NFA5 | AD8XDY | €10.62 |
APPROVED VENDOR -
Masonry Nail Fluted 2 1/2 Inch Length, 76PK
Model | Item | Price (ex. VAT) | |
---|---|---|---|
4NFA6 | AD8XDZ | €10.62 |
APPROVED VENDOR -
Masonry Nail Fluted 1 1/2 L, 645PK
Model | Item | Price (ex. VAT) | |
---|---|---|---|
4NFA7 | AD8XEA | €47.36 |
APPROVED VENDOR -
Masonry Nail Fluted 2 1/2 L, 380PK
Model | Item | Price (ex. VAT) | |
---|---|---|---|
4NFA8 | AD8XEB | €47.36 |
Masonry Nails
Masonry nails are designed for fixing objects on walls, ceilings and other surfaces. They are suitable for medium-duty loads and are used with bricks / concrete blocks. These thick, fluted brick nails are less likely to loosen or slip when holding an object as they feature grooved shafts. They can be installed using hammer drills, standard drills, masonry drill bits and framing hammers. The flutes on the shank bite into uncured concrete and brick surfaces.
Frequently Asked Questions
What points should be kept in mind while using masonry nails?
- It is advisable to use a framing hammer, which is heavier and more substantial than a typical claw hammer.
- Before hammering, drill pilot holes for the nails.
- Use pressure-treated wood for nailing lumber to concrete. Standard lumber may decay due to moisture, which gradually permeates the concrete.
- Furring strips and floor plates can be fastened to uncured concrete with fluted masonry nails if the flooring is not being fastened directly to the wood.
What safety considerations should be followed while using masonry nails?
- Use hearing protection and eye protectors while drilling.
- When drilling in concrete, use a particle mask since cement dust can harm the lungs.
- Do not bend the nails while driving them.
- No amount of pounding would help if the nail stops before its head reaches the surface. Instead, take out the nail and make the hole larger or deeper. After vacuuming the hole, try nailing again.
What tools or equipment can be used for hammering these masonry nails?
- Hammer drill
- Masonry drill
- Particle mask
- Eye protection
- Hearing protection
- Pencil
- Framing hammer
- Vacuum
What is the difference between concrete and masonry nails?
- Masonry nails can be round, square or fluted, whereas concrete nails have fluted shafts.
- Masonry nails are less likely to loosen or slip when holding an object because they feature grooved shafts for gripping brick or concrete surfaces.
- Concrete nails are more expensive, whereas masonry nails are less expensive and less prone to flexing / shattering.
Explore More
- Distribution
- Vises
- Check Valves and Backflow Preventers
- Lab Filtration
- Asphalt Testing
- Automotive Specialized Tools
- Split Bolt Connectors
- Transparent Office Tape
- Welding Torch Handles
- Stainless Steel Perforated Sheets
- E JAMES & CO Rubber Roll, Neoprene
- SCHNEIDER ELECTRIC E-stop Push Button Red
- ACROVYN Bumper Guard, Classic Maple, Acrovyn
- DAYTON Venturi Kits
- ENERPAC BHP Series Grip Pullers
- SMC VALVES Mb Series Tie-Rod Cylinder
- TRI-ARC U-Design Multi Platform Stair Unit Handrails
- HONEYWELL Concrete Anchor
- ACME ELECTRIC Bases
- ZURN FS12 12 Inch Square Sanitary PVC Floor Sinks