| Item | Grinder Pump System |
| Alarm Application | Indoor |
| Alarm Included | Yes |
| Amps | 7A |
| Base Material | Cast Iron , Thermoplastic |
| Bearing Type | Lower Ball, Upper Ball |
| Body Dia. | 21 3/4" |
| Cord Length | 15 ft. |
| Cord Length - Pumps | 15 ft. |
| Duty | Intermittent |
| Duty Cycle | Intermittent |
| Flow Rate @ 10 Ft. | 27 GPM |
| Flow Rate @ 10 Ft. Of Head | 27 GPM |
| Flow Rate @ 15 Ft. | 21 GPM |
| Flow Rate @ 15 Ft. Of Head | 21 GPM |
| Flow Rate @ 20 Ft. | 12 GPM |
| Flow Rate @ 20 Ft. Of Head | 13 GPM |
| Flow Rate @ 25 Ft. | 4 GPM |
| Flow Rate @ 5 Ft. | 23 GPM |
| Flow Rate @ 5 Ft. Of Head | 23 GPM |
| Frequency | 60 Hz |
| Handle | Yes |
| Housing Material | Cast Iron |
| Hp | 1/2 hp |
| Impeller Material | Engineered Plastic |
| Impeller Material - Pumps | Polypropylene |
| Includes | Check Valve |
| Inlet | 4" |
| Inlet Dia. | 4" |
| Inlet Size | 4" |
| Input Phase Ac | 1 |
| Max. Head | 26 ft. |
| Max. Head - Pumps | 26 ft. |
| Max. Liquid Temp. | 104°F |
| Min. Sump Basin Size | 18" |
| Motor Type | Permanent Split Capacitor |
| No. Of Pumps | 1 |
| Number Of Pumps | 1 |
| Off Point | 5 1/2" |
| On Point | 13" |
| Outlet Size | 1 1/4" |
| Overall Height | 30 1/8" |
| Phase | 1 |
| Pump Body Material | Cast Iron |
| Rpm | 3450 RPM |
| Shaft Material | Steel |
| Shaft Seal Material | Carbon Ceramic |
| Switch Actuation | Tether Float |
| Switch Electrical Connection | Piggyback |
| Switch Type | Tether |
| Switch Type - Pumps | Tether |
| Thermal Protection | Yes |
| Type | Simplex |
| Vent Size | 2" |
| Voltage | 115V AC |
| Agency Compliance | UL, CSA |
| Hz | 60 |
| Manufacturers Warranty Length | 3 yrs. |
| Phase - Pumps | 1 |
| Rated Voltage | 115V |
| Shaft Seal Material - Pumps | Carbon, Ceramic |
