| Item | Motor |
| Additional Details | Steel Edge 3/4 Motors Offer The Widest Range Of Electrical And Mechanical Features Of Any Motor On The Market Today. Steel Edge 3/4 Can Be Used On Pumps, Fans, Compressors, General Industrial Belt Drive, Direct Drive And Direct-Connected Equipment Where 12-Lead, Wye-Start/Delta-Run Is Required. Steel Edge 3/4 Is Also Available As An Inverter Duty Motor, Meeting Both Parts 30 And 31 Of NEMA MG-1 Standards. |
| Ambient Temp. | 40°C |
| Application | Dusty Or Dirty Environments, Other General Purpose Applications In Damp, Pumps, Compressors, Fans, Material Handling |
| Bearing Type | Ball |
| Duty Cycle | Continuous |
| Efficiency | 75.5% |
| Frame | 56C |
| Frame Material | Steel, Aluminum |
| Frequency | 60 Hz |
| Full Load Amps | 1.3/0.6A |
| Hp | 1/3 hp |
| Insulation Class | Class F |
| Inverter Rated | No |
| Motor Application | General Application |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Mounting Position | Horizontal |
| Motor Shaft Design | Keyed |
| Motor Shaft Rotation | Clockwise/Counter Clockwise |
| Motor Type | Three Phase |
| Mounting Type | Horizontal/Foot |
| Nameplate Rpm | 1145 RPM |
| Nema Design | B |
| No. Of Poles | 6 |
| No. Of Speeds | 1 |
| Overall Length | 10 13/16" |
| Phase | 3 |
| Product Type | AC Motors |
| Rpm Range | 1101-1200 RPM |
| Service Factor | 1.25 |
| Shaft Dia. | 5/8" |
| Shaft Length | 2 1/16" |
| Thermal Protection | None |
| Torque | 1.5 lbs.-ft. |
| Usable @ 200v | No |
| Usable @ 208v | Yes |
| Voltage | 208-230/460V AC |
| Hz | 60 Hz |
| Ins. Class | Class F |
| Length Less Shaft | 8 3/4" |
| Manufacturers Warranty Length | 1 yr. |
| Max. Ambient Temp. | 40°C |
| Motor Bearings | Ball |
| Motor Design | 3-Phase |
| Motor Frame Material | Steel |
| Motor Mounting Type | Rigid Base |
| Motor Service Factor | 1.25 |
| Motor Sub Application | Blowers, Compressors, Fans, Pumps and Direct Connected Equipment |
| Motor Thermal Protection | None |
| Nominal Efficiency | 75.5% |
| Part Winding Start Capable | Yes |
| Removable Base | Regreasable Bearings |
| Standards | CSA CERTIFIED, UL RECOGNIZED |
| Weight | 23 lbs. |
