Item | Pillow Block Bearing |
Bolt Size | 5/8" |
Bore Dia. | 2" |
Dynamic Load Capacity | 7868 lbs. |
Finish | Paint |
Grade | Grade 52100 |
Housing Material | Cast Iron |
Insert Finish | Chrome Plated |
Insert Material | Steel |
Insert Type | Ball |
Lock Type | Set Screw |
Lubrication | Shell Alvania RL2 Or Nlgi #2 Equivalent |
Mounting Hole Center To Center | 159 mm |
Mounting Surface To Shaft Center | 57.1 mm |
Number Of Bolts | 2 |
Overall Height | 113 mm |
Overall Length | 206 mm |
Overall Width | 51.6 mm |
Static Load Capacity | 5216 lbs. |
Temp. Range | -40°F to +250°F |
Base Height | 0.826" |
Base Width | 2.362" |
Bearing Insert Material | Alloy Steel |
Bearing Insert Type | Radial Ball |
Bearing Material Grade | Grade 52100 |
Bore Diameter | 2" |
Bore Diameter Tolerance | +/-0.0008" |
Closure | Double Sealed |
Dynamic Radial Load Capacity | 7868 lbf. |
Features | Anti Rotation Device, Dual Heavy Duty Slinger Type Contact Seals, Grease Fitting for Adding Lubricant, One Piece Cast Iron Housing, Solid Base, Standard Duty Unit, Eccentric Locking Collar, Triple Lip Seals Available on Request, Wide Inner Ring Bearing |
Housing Material Finish | Painted |
Lubricant Material | Grease |
Lubrication Openings | Grease Fitting |
Maximum Temperature | 250°F |
Minimum Temperature | -40°F |
Mount Hole Center-to-center Length | 6 1/4" |
Mount Hole Center-to-center Width | 6 1/4" |
Mount Type | Bolt-Through |
Mounting Bolt Size | 5/8" |
Mounting Surface To Shaft Center Height | 2 15/64" |
Number Of Mount Holes | 2 |
Resistance Properties | Corrosion Resistant, Rust Resistant, Wear Resistant |
Seal Material | Synthetic Rubber |
Seal Type | Contact |
Shaft Locking Type | Set Screws |
Standards | AFBMA, ISO |
Static Radial Load Capacity | 5215 lbf. |