Get it by Tuesday, Jun 17
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
Payment
| Item | Jobber Length Drill Bit |
| Coolant Fed | Coolant Through |
| Coolant Through | No |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.185 |
| Depth X Dia. Ratio | 5xd |
| Drill Bit Dimension Type | Wire |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Material | Carbide |
| Drill Length Class | Jobber Length |
| Finish | WXS |
| Flute Length | 43 mm |
| Flute Type | Slow Spiral |
| Helix Angle | +12° to +20° |
| Material | Carbide |
| Max. Drilling Depth | 43 mm |
| Mfr. Series | 5955NI |
| Number Of Coolant Holes | 2 |
| Number Of Flutes | 2 |
| Overall Length | 88 mm |
| Point Angle | 140° |
| Point Type | R Thinning Point |
| Primary Material Application | Hardened Steel, Nickel, Steel |
| Primary Material Application Iso Code | H, P, S |
| Secondary Material Application | Cast Iron, Die Steel, Hardened Steel, High Carbon Steel, Low Carbon Steel, Medium Carbon Steel |
| Secondary Material Application Iso Code | H, K, P |
| Shank Dia. | 6 mm |
| Shank Length | 45 mm |
| Shank Type | Straight |
| Sheeter Drill | No |
| Size | #13 |
| Depth:dia. Ratio | 5xD |
| Drill Bit Point Angle | 140° |
| Drill Bit Point Type | R Thinning Point |
| Drill Bit Size | #13 |
| Drill Diameter Tolerance | +0.000, -0.018 mm |
| Finish - Machining | WXS |
| Material - Machining | Carbide |
| Maximum Drilling Depth | 43 mm |
| Measurement System | Wire |
| Series | 5955Ni Series |
| Shank Diameter | 6 mm |
| Shank Type - Machining | Straight |
| Standards | NOT RATED |
| Ship weight (kg) | 0.05 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
