Krueger H-1.5-72 Therma level gauge is suitable for above-the-ground storage tanks. This easy-to-install AT-A-GLANCE level gauge is designed for measuring all types of liquid levels.
Features:
- Krueger H-1.5-72 AT-A-GLANCE Therma level gauge comes with a 2-piece bushing structure to point the swing arm away from corners, walls & other tank impediments.
- Its simple mechanical design ensures longevity, minimum maintenance, rapid installation and affordable repairs.
- The stainless steel constructed wetted / bushing provides exceptional compatibility with aggressive chemicals.
- On one side, the gauge is calibrated in eighths of a tank and on the other, in quarters of a tank.
- The estimated liquid level in the tank is depicted at the top of the red indicator, making it simple to read.
- It features a Duro nitrile gasket, a stainless steel rivet & float and aluminium assembly nut construction for prolonged use and durability.
- This unit can withstand temperatures ranging from -20 to 200 degrees Fahrenheit and pressure up to 70 psi.
Compatible Accessories:
- Krueger Drum Alarms: These Dalarm (direct mount) and Ralarm (remote mount) units are designed to provide visual & audible indication of tank levels. They feature a magnetic switch that triggers a 110 dB alarm and are powered by a 9V lithium battery. These models can be easily reset, even in Alarm mode.
- Krueger LED At-A-Glance Accessories: They provide remote reading capability to the mechanical gauge.
- Krueger Guard Gauges: These covers protect the exposed plastic components on top of the gauge.
- Krueger Glass Calibration: It offers defence against heat, gases & deterioration, and also aids in passing fire inspections.
Frequently Asked Questions:
Q. How do you calibrate a level gauge?
A.
- Open the level gauge housing.
- Find the screw and spin it using an Allen key.
- Depending on the offset you want, slowly rotate either clockwise or counter-clockwise.
Q. How to install a level gauge?
A.
- Unscrew the lid of the barrel.
- Extend the level arm of the flow gauge.
- Slide the gauge tube inside the barrel and attach the float to the other end of the tube.
- Ensure that the tube is plumb / vertical and firmly hand-tighten the cap nut.
- Drill a hole in each of the security housing locations.
- Insert the security screws and tighten.
Q. How does a water level indicator work?
A. Water level indicators use sensor probes to show the amount of water in a storage barrel. These probes relay data back to the control panel to set off an alert.