| Item | Gasoline Engine, 4 Cycle, 9.5 HP |
| Air Filter | Pleated Paper Encased With Perforated Metal/Foam Precleaner |
| Cylinders | Cast Iron Cylinder Liner |
| Design | Overhead Valve |
| Engine Rpm | 3750 RPM |
| Fuel Tank Capacity | 7.8 qt |
| Gear Box | Internal |
| Hp | 9 1/2 hp |
| Ignition Type | Electronic |
| Low Oil Shut Down | Pre Start Only |
| Muffler | Yes |
| Number Of Cycles | 4 |
| Overall Depth | 15.86" |
| Overall Height | 17 3/4" |
| Overall Width | 16.83" |
| Rotation | CCWSE |
| Shaft Dia. | 1" |
| Shaft Height (in.) | 5.26" |
| Shaft Key (in.) | 0.25" |
| Shaft Length | 3.49" |
| Shaft Orientation | Horizontal |
| Starter Type | Electric, Recoil |
| Type | 4 Cycle |
| Air Cleaner Type | Quad Clean 4 Stage Heavy Duty Cyclonic |
| Bearings | Dual Ball |
| Carb Compliant | CARB Compliant |
| Engine Cycle | 4-Cycle |
| Engine Displacement | 276.94 cc |
| Engine Series | Command PRO Series |
| Features | Power or Repower Your Equipment without Expensive Modifications |
| Gross Torque | 13.9 lbs.-ft. |
| Horsepower | 9 1/2 hp |
| Includes | Amp Choke, Dual Oil Fill/Drain, Engine Mounted Throttle, Fuel Shut Off Valve, Remote Throttle Ready, Stellite Exhaust Valve, Variable Speed |
| Maintenance Frequency | 100 hrs. Oil Change, 200 hrs. Replace Air Filter |
| Maximum Speed | 4000 RPM |
| Number Of Cylinders | 1 |
| Overall Depth Facing Pto | 15 7/8" |
| Overall H Facing Pto | 17 3/4" |
| Overall W Facing Pto | 16 13/16" |
| Pto Shaft Diameter | 1" |
| Pto Shaft Height | 5 1/4" |
| Pto Shaft Length | 3 1/2" |
| Recommended Use | Industrial/Construction |
| Shaft Configuration | Drilled and Tapped 1.1" Deep X 7/16 20 UNF |
| Shaft Diameter | 3/4" |
| Shaft Height | 5 1/4" |
| Shaft Key | 1/4" |
| Standards | CARB PHASE III, EPA PHASE III, EU STAGE V |
| Start Type | Recoil |
