Hartell LTA-1 sink drain pump system is a self-contained unit that connects directly to laundry tray tubs. It is used to drain water from wet bar sinks, kitchenettes, utility and laundry tray sinks. This pump includes a pressure-activated switch that turns on the pump when water enters the tub.
Features:
- Hartell LTA-1 sink drain pump system allows sink installation to drain without breaking concrete.
- It does not require traps or inlet piping and mounts directly to the sink tailpiece.
- This pump system has ABS plastic housing for impact, corrosion and chemical resistance.
- It features an electric motor with propylene impellers to produce lift of up to 11 ft.
Compatible Accessories:
- PTFE Thread Sealing Tapes: This pump system requires 1-inch wide tapes to create a waterproof seal at the connection points.
Standards and Approvals:
Frequently Asked Questions:
Q. What is the maximum temperature this pump can withstand?
A. 140 degrees F.
Q. How to install this pump?
A.
- Place the fibre gasket on drain threads and the O-ring on the drain.
- Lift the pump and engage inlet threads with sink drain threads.
- Rotate the pump until the tray adapter flange contacts the gasket.
- Once the contact is made, rotate the pump until it is firmly secured to the drain.
- Install the discharge piping and plug the pump into a grounding-type receptacle.
Q. What is the maximum flow rate this pump can produce?
A.
- 28 GPM at 5 ft
- 10 GPM at 10 ft