GREENLEE 880 Hydraulic Rigid Conduit Bender, 1 To 2 Inch Rigid Conduit Capacity

Features:

• This Greenlee 880 hydraulic pipe bender can bend 1 to 2 inch galvanised rigid conduits and schedule 40 pipes.
• It can be powered using any Greenlee hydraulic pump that delivers pressure up to 10000 psi (Greenlee 976-22FS, 976-22PS, 980-22FS & 980-22PS).
• This Greenlee hydraulic conduit bender has pin-assembled aluminium components for portability & durability.
• It can bend pipes up to 90 degrees in one go.
• Greenlee pipe bender is equipped with a ram travel scale and bending charts for control over bending angles & radius.

Compatible Accessories:

• Bending Shoes: Use aluminium-made 1/2 inch shoes and 3/4 inch shoes for bending GRC (galvanised rigid conduit) and Schedule 40 pipes. Use PVC shoes for bending 1/2 to 2 inch PVC-coated rigid conduits. Use ductile iron shoes for bending 1 to 2-inch Schedule 80 pipes.
• Bending Tables With Conduit Support Pins: Greenlee hydraulic bender can be mounted on Greenlee 1802 bending table using Greenlee 21357 conduit support pins for faster and precise bending.

Standards and Approvals:

• ISO 9001

Frequently Asked Questions:

Q. When do we require a segment bend?

A. Segment bending is required while bending pipes having a large bending radius. Segment bending is made using a series of small bends spaced closely. Users should use Greenlee 1802 bending table & Greenlee 1807 bending degree indicator to easily and accurately make the bend.

Q. What to do in case the Greenlee pipe benders fail to operate?

A. First, check whether the selected pipe bender can bend the required pipe diameter. Then verify the hydraulic fluid level of the hydraulic cylinders and check for any leaks due to faulty, damaged or missing parts that could have compromised the safe operation of the machine. The sides of the corner bracket should be lubricated to reduce abrasion related damages when in contact with the pipe.