| Item | Centrifugal Pump |
| Amps | 21A |
| Best Efficiency Flow | 140 GPM |
| Best Efficiency Flow Range @ Head | 100 to 200 GPM @ 75 to 38 ft. |
| Best Efficiency Flow Rate @ Head | 140 GPM @ 70 ft. |
| Best Efficiency Head | 70 ft. |
| Compatible Discharge Pipe Size | 2 1/2" |
| Compatible Intake Pipe Size | 3" |
| Drain Plug | All Position |
| Duty Cycle | Continuous |
| For Use With Potable Systems | Yes |
| Frame | 184JM |
| Grade | Grade 316 |
| Height | 10 1/2" |
| Housing Material | Cast Iron |
| Hp | 5 hp |
| Impeller Dia. | 4 1/2" |
| Impeller Material | Bronze |
| Impeller Type | Closed |
| Inlet Pressure | 100 psi |
| Length | 25 1/2" |
| Max. Case Pressure | 175 psi |
| Max. Flow Rate | 210 GPM |
| Max. Flow Rate @ 30 Ft. | 240 GPM |
| Max. Flow Rate @ 40 Ft. | 215 GPM |
| Max. Flow Rate @ 50 Ft. | 192 GPM |
| Max. Flow Rate @ 60 Ft. | 162 GPM |
| Max. Flow Rate @ 70 Ft. | 120 GPM |
| Max. Flow Rate @ Head | 210 GPM @ 58 ft. |
| Max. Head | 75 ft. |
| Max. Liquid Temp. | 250°F |
| Max. Operating Pressure | 175 psi |
| Max. Solid Dia. | 1/3" |
| Media Type | Water |
| Min. Flow Rate | 120 GPM |
| Min. Flow Rate @ Head | 50 GPM @ 75 ft. |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Type | JM |
| Mounting Orientation | Horizontal |
| Phase | 1 |
| Port Rotation | 90 Deg. Increments |
| Rpm | 3500 RPM |
| Seal Application | Water |
| Seal Material | Buna Elastomer, Carbon Ceramic, Stainless Steel |
| Self Priming | Manual |
| Series | 3656 Series |
| Service Factor | 1 |
| Shaft Material | Stainless Steel |
| Shut Off Pressure | 175 psi |
| Specific Gravity | 1 |
| Type | Centrifugal |
| Voltage | 208-230V AC |
| Volute Material | Cast Iron |
| Wetted Material | Bronze, Buna N, Carbon Ceramic, Stainless Steel |
| Width | 8 3/5" |
| Compatible With Media Type | Water |
| Connection Type | NPT |
| Discharge Type | NPT |
| Flow Rate (maximum) | 210 GPM |
| Flow Rate (minimum) | 120 GPM |
| Frequency | 60 Hz |
| Horsepower | 5 hp |
| Maximum Feet Of Head | 75 ft. |
| Maximum Flow Rate @ 60 Feet Of Head | 210 GPM |
| Maximum Flow Rate @ 70 Feet Of Head | 150 GPM |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Nameplate Voltage | 208-230V AC |
| Overall Height | 10 1/2" |
| Overall Length | 25.5" |
| Overall Width | 8 3/5" |
| Priming | Manual |
| Pump Housing Material | Cast Iron |
| Rpm (maximum) | 3500 RPM |
| Solid Diameter (maximum) | 0.31" |
| Specific Gravity (maximum) | 1 xg |
| Standards | ANSI 61, NSF CERTIFIED |
